Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X500-50S
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X500-50S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 500mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke500 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X500-50S
The hard-anodized aluminium barrel keeps the assembly light, and the G1/2 port feeds a 32 mm rod threaded M26x1.5.
The -50S code means an external stop screw lets you trim the extend stroke on-site from 500 mm down to 450 mm without swapping the cylinder, leaving the retract end fixed. A built-in magnet works with CMSE/DMSE sensors in the side grooves, and 33 mm adjustable cushions absorb end-impact. The stop sets end position only; it is not a load lock, so fit an external rod lock or pilot check valve if you need to hold a suspended load.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X500-50S Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X500-50S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 500 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X500-50S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X500-50S Is Used
Press Tooling Touch-Up
Trim the 500 mm extend stroke down by 50 mm on-site to dial in the exact contact point on a forming press without machining a new stop.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X500-50S the Right Cylinder?
The 50 mm adjuster window is ideal for sharing one spare cylinder across several stroke variants or fine-tuning a tooling touch point on the floor. JSIJ mounting options include FA, LB, TC, TCM1, and TCM2. The -S magnet supports CMSE/DMSE switches. Because the 500 mm stroke is long, always use an external guide rail to prevent rod bending and side-load damage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X500-50S FAQ
At 0.5 MPa this 100 mm bore cylinder pushes 3927 N and pulls 3574 N. At 0.7 MPa it pushes 5497 N and pulls 5003 N. The theoretical maximum force is 801 kgf at 1.0 MPa. It uses a G1/2 port and a 32 mm rod.
The nominal extend stroke is 500 mm, but an external stop screw lets you shorten that by up to 50 mm on-site, giving a usable range of 450 to 500 mm. The retract end remains fixed. The -S indicates a built-in magnet for CMSE/DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X500-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.