Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X60-50S
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X60-50S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 60mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke60 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X60-50S
The extruded hard-anodized aluminum profile barrel keeps the overall body shorter and more compact than a same-bore ISO 15552 cylinder. A G1/2 port feeds the chamber, while a 32 mm rod and M26x1.5 thread handle the workload.
The -50 code means an external adjuster can shorten the extend stroke on-site by up to 50 mm, dropping the usable extension from the 60 mm maximum down to 10 mm without swapping the cylinder. This on-site end-position tuning lets you standardize spares across stroke variants. The -S suffix adds a built-in piston magnet for CMSE/DMSE sensors in the side grooves.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X60-50S Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X60-50S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X60-50S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X60-50S Is Used
Short-Stroke Clamping
Dial in the exact 10 to 60 mm extend reach needed to clamp heavy steel plates without re-engineering the fixture.
Press Fit Tuning
Fine-tune the downward extend stop on-site to seat bearings precisely, avoiding over-travel on delicate assemblies.
Heavy Diverter Gate
Adjust the push distance on a sorting line to deflect large packages of varying widths accurately.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X60-50S the Right Cylinder?
The adjustable stroke shines when you need fine end-position tuning across multiple stations or want a shared spare for slightly different extend lengths. Mounting options include FA, LB, TC, TCM1, and TCM2 brackets. The -S magnet supports CMSE/DMSE switches for position confirmation. Even at 60 mm, guide side loads carefully for smooth operation.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X60-50S FAQ
At 0.5 MPa it pushes 3927 N and pulls 3574 N. At 0.7 MPa it pushes 5497 N and pulls 5003 N. The theoretical maximum is 801 kgf at 1.0 MPa. The air port is G1/2.
The nominal 60 mm extend stroke is the maximum. The external adjuster lets you shorten the extend stroke on-site by up to 50 mm, giving a usable range of 10 to 60 mm. The retract end remains fixed. This stop sets the end position and is not a load lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X60-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.