Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-10
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X600-10 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 600mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke600 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-10
The -10 code means you can shorten the extend stroke by up to 10 mm, giving a usable range of 590-600 mm while the retract end stays fixed. This on-site tuning lets you share one spare across minor stroke variants without changing the whole cylinder. The extruded hard-anodized aluminium barrel makes the body shorter and more compact than a same-bore ISO 15552 unit. Pneumatic connections use a G1/2 port.
This double-acting double-rod unit runs at 30-800 mm/s with 33 mm adjustable air cushions at both ends. Because this SKU lacks a magnet, it cannot take a CMSE or DMSE sensor. The cushion only decelerates the load near the end of travel; a plain cylinder drifts on air loss, so fit an external rod lock or pilot-operated check valve to hold a suspended load.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-10 Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-10 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-10
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-10 Is Used
Press Fit Dialing
Fine-tune the 590-600 mm extend stroke on-site to set precise pressing depth for bearings without machining custom spacers.
Spare Consolidation
Keep one 600 mm cylinder as a universal spare for 590 mm variants, using the external adjuster to match the required stroke.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-10 the Right Cylinder?
The -10 mm adjuster is ideal for dialing in final end positions during machine commissioning or sharing spares across similar stroke lengths. JSIJ mounting options include FA, LB, TC, TCM1, and TCM2. For this 600 mm stroke, always use an external guide to prevent rod bending and absorb side loads. Add the -S variant if you need CMSE or DMSE magnetic sensing, as this plain SKU cannot accept a switch.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-10 FAQ
At 0.5 MPa it pushes 3927 N and pulls 3574 N. At 0.7 MPa it pushes 5497 N and pulls 5003 N. The theoretical maximum force is 801 kgf at 1.0 MPa. It uses a G1/2 port.
The external stop screw lets you shorten the extend stroke by up to 10 mm on site, giving a usable extend range of 590-600 mm. The nominal 600 mm stroke is the maximum, and the retract end is fixed. This stop sets the end position and is not a load lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.