Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-10S
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X600-10S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 600mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke600 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-10S
The hard-anodized aluminum profile barrel keeps the overall body shorter and more compact than a same-bore ISO 15552 cylinder. A built-in piston magnet ships standard, ready to accept CMSE or DMSE reed and electronic switches in the side grooves.
The -10 code defines an external stop screw that lets you shorten the extend stroke on-site by up to 10 mm, yielding a usable 590-600 mm end-position window while the retract end remains fixed. Pneumatic connections use a G1/2 port, and the adjustable air cushions provide 33 mm of deceleration at each end.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-10S Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-10S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-10S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-10S Is Used
Press Stroke Tuning
Fine-tune the final 10 mm of a clamping or pressing action on-site without swapping the cylinder, ensuring precise contact force on varied material thicknesses.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-10S the Right Cylinder?
When sizing this 100 mm bore, stepping down to an 80 mm actuator drops the 0.5 MPa push force to 2513 N, while stepping up to a 125 mm bore raises it to 6136 N. The 10 mm adjustable window is ideal for sharing a single spare cylinder across multiple machines that need slightly different end positions, saving inventory space. Mounting options include FA, LB, TC, TCM1, and TCM2 brackets. Because the -S suffix denotes a magnetic piston, you can fit CMSE or DMSE sensors directly. With a 600 mm stroke, always support the load with external guides to prevent rod bending and excessive side loading.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-10S FAQ
The theoretical maximum force is 801 kgf at 1.0 MPa. The air port size is G1/2.
The external stop screw lets you shorten the extend stroke on-site by up to 10 mm, giving a usable extend range of 590-600 mm where 600 mm is the maximum. The retract end is fixed. This mechanism only sets the end position and does not lock the load; use an external rod lock or pilot-operated check valve to hold a load against air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.