Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-40S
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X600-40S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 600mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke600 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-40S
The hard-anodized aluminum barrel keeps the overall body shorter and more compact than a same-bore ISO 15552 unit, while the G1/2 port handles the necessary air volume.
The -40 code means an external stop screw lets you shorten the extend stroke on-site by up to 40 mm, giving a usable range of 560 to 600 mm without changing the cylinder itself. The retract end remains fixed, and the adjustable air cushions absorb 33 mm of end-of-travel impact. Because this SKU includes the -S magnet, you can drop CMSE or DMSE reed and electronic switches straight into the side sensor grooves.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-40S Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-40S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-40S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-40S Is Used
Pallet Diverting Gate
Fine-tune the 600 mm extend stroke by up to 40 mm on-site to match varying pallet widths without swapping the actuator.
Press Ejection Station
Uses the -S magnet and CMSE switches to confirm the retracted position before the next press cycle begins.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-40S the Right Cylinder?
The adjustable stroke is ideal for sharing a spare across multiple stroke variants or fine-tuning the end position on-site. JSIJ mounting options include FA, LB, TC, TCM1, and TCM2. Because the 600 mm stroke is long, always support the load with an external guide to prevent rod bending and side-load wear. Remember that the external stopper sets position only; it is not a load lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-40S FAQ
At 0.5 MPa it pushes 3927 N and pulls 3574 N. At 0.7 MPa it pushes 5497 N and pulls 5003 N. The theoretical maximum force is 801 kgf at 1.0 MPa. This 100 mm bore unit uses a G1/2 air port and features a 33 mm adjustable air cushion at each end.
The 600 mm nominal stroke is the maximum extend length. The external adjuster screw lets you shorten the extend stroke on-site by up to 40 mm, yielding a usable range of 560 to 600 mm. The retract end is fixed, and this stopper only sets the end position—it does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.