Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-50S
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X600-50S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 600mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke600 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-50S
The extruded hard-anodized aluminium profile barrel keeps the body shorter and more compact than a same-bore ISO 15552 cylinder. Air enters via a G1/2 port, driving a 32 mm rod with M26x1.5 threading and 33 mm adjustable air cushions at each end.
The -50 suffix means an external stop screw lets you trim the extend stroke by up to 50 mm on-site, giving a usable forward travel of 550 to 600 mm while the retract end stays fixed. You can fine-tune the end position without swapping the cylinder, making it ideal for shared spares across stroke variants. The -S code adds a built-in piston magnet for CMSE/DMSE switches in the side grooves. Note that a plain cylinder drifts on air loss; use an external rod lock for held loads.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-50S Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-50S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-50S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-50S Is Used
Pallet Diverting
Tunes the 550 to 600 mm extend stop on-site to match varying pallet widths without changing the cylinder length.
Press Ejection
Uses the 33 mm adjustable cushions to decelerate the heavy 100 mm piston smoothly at the end of a long 600 mm stroke.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-50S the Right Cylinder?
This JSIJ model supports Basic, FA, LB, TC, TCM1, and TCM2 mounts. The -S magnet allows CMSE/DMSE sensors to drop directly into the barrel grooves. Because the 600 mm stroke creates leverage, always support the rod against side-load bending and use external guide rails to prevent premature wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-50S FAQ
At 0.5 MPa it pushes 3927 N and pulls 3574 N. At 0.7 MPa it pushes 5497 N and pulls 5003 N. The theoretical maximum force is 801 kgf at 1.0 MPa.
The -50 code provides an external adjuster that shortens the extend stroke by up to 50 mm on-site. The usable extend travel is 550 to 600 mm, with 600 mm being the maximum. The retract end remains fixed.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.