Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-75S
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X600-75S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 600mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke600 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-75S
The hard-anodized aluminum profile barrel leaves external tie rods out of the design entirely, making the body shorter and more space-efficient than a same-bore ISO 15552 cylinder. A G1/2 port feeds the chamber, while the integrated -S magnet allows direct mounting of CMSE or DMSE sensors into the side grooves.
The -75 code defines an external adjuster window that lets you shorten the extend stroke on-site by up to 75 mm, dropping the usable travel from the 600 mm maximum down to 525 mm without swapping the cylinder. This on-site tuning is ideal for dialing in end positions, and the retract end remains fixed.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-75S Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-75S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-75S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-75S Is Used
Press Stroke Tuning
Dial in the exact 525 to 600 mm clamping reach on an assembly press using the external adjuster, avoiding cylinder swaps when product heights change.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-75S the Right Cylinder?
The JSIJ100X600-75S is the right pick when you need that middle-ground force alongside on-site stroke tuning, letting you standardize one spare across slightly different 525-600 mm travel machines. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2 brackets. Because the 600 mm stroke is long, always support the load with external guides to prevent rod bending and side-load wear. The -S version ships with a piston magnet ready for CMSE/DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-75S FAQ
The theoretical maximum force is 801 kgf at 1.0 MPa. The air port is G1/2.
The external stop screw lets you shorten the extend stroke on-site by up to 75 mm, giving a usable extend range of 525 to 600 mm. The nominal 600 mm stroke is the maximum, and the retract end is fixed. This stop sets the end position but does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X600-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.