Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X700-100
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X700-100 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 700mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke700 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X700-100
Its extruded hard-anodized aluminium barrel omits tie rods entirely, making the body shorter and more compact than a same-bore ISO 15552 unit. The G1/2 port handles the air flow needed for its 32 mm piston rod.
The -100 code means an external adjuster can shorten the extend stroke on-site by up to 100 mm, giving a usable 600 to 700 mm range while the retract end stays fixed. You can fine-tune the end position without physically swapping the cylinder. Note this plain SKU lacks a magnet and cannot take a CMSE/DMSE sensor.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X700-100 Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X700-100 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 700 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X700-100
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X700-100 Is Used
Heavy Pallet Diverter
Pushes loaded pallets onto a secondary line, using the 100 mm adjuster to dial in the exact stop distance for varying load widths.
Press Load Lowering
Lowers heavy press blanks, using the adjustable end-position to compensate for material thickness variations without re-mounting the actuator.
Multi-Size Carton Stop
Acts as a fixed physical stop on a packaging roller bed, shortening the extend stroke on-site by 100 mm to accommodate a mixed run of carton sizes.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X700-100 the Right Cylinder?
The adjustable window shines when you need on-site end-position tuning or want a shared spare across slightly different stroke variants. Mounting options include FA, LB, TC, TCM1, and TCM2. Because the stroke is 700 mm, always support the rod against side-load bending with an external guide. For position feedback you must select the -S variant, as this base model cannot host a sensor.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X700-100 FAQ
At 0.5 MPa it pushes 3927 N and pulls 3574 N. At 0.7 MPa push is 5497 N and pull is 5003 N. The theoretical maximum force is 801 kgf at 1.0 MPa. The air port is G1/2.
The nominal 700 mm stroke is the maximum. An external stop screw lets you shorten the extend stroke on-site by up to 100 mm, yielding a 600 to 700 mm usable range, while the retract end remains fixed. This mechanism only sets the end position; it is not a lock. The cylinder will drift on air loss, so use an external rod lock or pilot-operated check valve for held loads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X700-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.