Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X75-50
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X75-50 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 75mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke75 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X75-50
Its extruded hard-anodized aluminium barrel omits tie rods, making it shorter and more compact than a same-bore ISO 15552 unit. The G1/2 port feeds the 32 mm rod to generate 3574 N of pull force on the retract side.
The -50 code means an external adjuster can shorten the extend stroke on site by up to 50 mm. You get a usable extend range of 25 to 75 mm without swapping the cylinder. Note that this plain SKU lacks a magnet and cannot take a CMSE or DMSE sensor.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X75-50 Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X75-50 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X75-50
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X75-50 Is Used
Press Fit Tuning
Dial in the exact 25 to 75 mm extend depth for seating bearings without machining custom spacers.
Variable Transfer Stop
Act as an adjustable flight stop on a heavy conveyor, trimming the extend position by up to 50 mm as product sizes change.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X75-50 the Right Cylinder?
The external adjuster is ideal for sharing one spare across stroke variants or fine-tuning the end position on-site. You can mount it via FA, LB, TC, TCM1, or TCM2 brackets. Since the nominal stroke is only 75 mm, side-load stress is minimal, but always guide the load smoothly. Add the -S variant if you need CMSE or DMSE sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X75-50 FAQ
At 0.5 MPa it pushes with 3927 N and pulls with 3574 N. At 0.7 MPa the push is 5497 N and the pull is 5003 N. The theoretical maximum force is 801 kgf at 1.0 MPa. It uses a G1/2 port, a 32 mm rod, and M26x1.5 rod-end thread.
The 75 mm nominal stroke is the maximum extend length. The external adjuster lets you shorten the extend stroke on-site by up to 50 mm, giving a usable range of 25 to 75 mm. The retract end is fixed. This mechanism sets the end position and does not lock the load; use an external rod lock or pilot-operated check valve to hold a load against air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X75-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.