Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X75-75
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X75-75 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 75mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke75 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X75-75
The hard-anodized aluminum profile barrel keeps the overall body shorter and more compact than a same-bore ISO 15552 cylinder.
The external adjuster lets you shorten the extend stroke on-site by up to 75 mm, meaning the usable extend range is 0-75 mm while the retract end remains fixed. It connects via a G1/2 port and uses a 32 mm rod with an M26x1.5 thread. This SKU lacks a magnet, so it cannot take CMSE or DMSE sensors; you would need the -S variant for position detection.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X75-75 Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X75-75 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X75-75
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X75-75 Is Used
Press Fit Tuning
Fine-tune the 0-75 mm extend endpoint on-site to set precise pressing depth for bearing insertion without changing the physical cylinder mount.
Variable Stopper Arm
Act as a heavy-duty stopping gate on a conveyor, where the external adjuster dials in the exact protrusion distance to accommodate different product widths.
Pallet Positioning
Push heavy 200 kg pallets into a machining cell, using the adjustable stroke to compensate for mechanical wear or fixture changes over time.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X75-75 the Right Cylinder?
The adjustable-stroke mechanism is ideal for sharing a single spare across multiple stroke variants or fine-tuning the extend endpoint without swapping the cylinder. You can mount it using basic, FA, LB, TC, TCM1, or TCM2 brackets. Because the nominal stroke is only 75 mm, side-load guide requirements are minimal, but always guide the rod for heavy 100 mm bore loads. Remember that this non-magnet SKU cannot support sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X75-75 FAQ
At 0.5 MPa it pushes 3927 N and pulls 3574 N. At 0.7 MPa it pushes 5497 N and pulls 5003 N. The theoretical maximum force is 801 kgf at 1.0 MPa. This 100 mm bore cylinder uses a G1/2 port.
The nominal 75 mm extend stroke is the maximum. An external stop screw lets you shorten the extend stroke on-site by up to 75 mm, giving a usable extend range of 0-75 mm. The retract end is fixed. This mechanism sets the end position and is not a load lock; use an external rod lock or pilot-operated check valve to hold a load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X75-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.