Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X80-10S
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X80-10S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 80mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke80 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X80-10S
The hard-anodized aluminum barrel makes it shorter and more compact than a same-bore ISO 15552 unit.
The external adjuster lets you trim the extend stroke by up to 10 mm on-site, giving a usable range of 70-80 mm without swapping the cylinder. Air connects via a G1/2 port, and the -S suffix means a built-in magnet for CMSE/DMSE sensors. Remember that the air cushion only decelerates the load; use an external rod lock or pilot-operated check valve if you need to hold position on air loss.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X80-10S Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X80-10S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X80-10S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X80-10S Is Used
Pallet Positioning
Shifts loaded pallets in tight cells where the shorter JIS profile saves space, trimming the extend stroke 10 mm to clear adjacent conveyors.
Vertical Plunge
Pushes a 200 kg tooling head downward, using the adjustable stop to set the precise lower end position and the cushion to decelerate before impact.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X80-10S the Right Cylinder?
The 10 mm adjustable window is ideal for fine-tuning the extend end position on-site or standardizing a shared spare across slightly different stroke variants. Mounting options include FA, LB, TC, TCM1, and TCM2. The -S magnet enables CMSE/DMSE sensor switches. Because the 80 mm stroke is under 300 mm, side-load risks are minimal, but always guide the load for smooth operation.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X80-10S FAQ
At 0.5 MPa it pushes 3927 N and pulls 3574 N. At 0.7 MPa it pushes 5497 N and pulls 5003 N. The theoretical maximum is 801 kgf at 1.0 MPa. The air port is G1/2, the rod is 32 mm with an M26x1.5 thread, and it has 33 mm adjustable cushions at both ends.
The nominal 80 mm stroke is the maximum extend length. The external stop screw lets you shorten the extend stroke by up to 10 mm on-site, giving a usable range of 70-80 mm. The retract end remains fixed. This mechanism sets the end position and does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X80-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.