Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X80-20
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X80-20 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 80mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke80 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X80-20
The extruded hard-anodized aluminum profile barrel leaves out external rods, making the body shorter and more compact than a same-bore ISO 15552 cylinder.
The -20 code defines a 20 mm external adjuster window that shortens the extend stroke on site, giving a usable forward travel of 60 to 80 mm while the retract end stays fixed. You can fine-tune the end position without swapping the cylinder. Air connects via a G1/2 port, and adjustable 33 mm cushions decelerate the load at both ends. Note that this plain SKU lacks a magnet and cannot take a CMSE or DMSE sensor.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X80-20 Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X80-20 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X80-20
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X80-20 Is Used
Press Fit Tuning
Dial in the exact 60 to 80 mm extend contact point for seating bearings without remounting the entire actuator.
Transfer Diverter
Adjust the extend stop on the fly to sort different package sizes on a heavy packaging line.
Pallet Stop Gate
Fine-tune the gate extension to handle varying pallet widths while delivering 3927 N of holding push at 0.5 MPa.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X80-20 the Right Cylinder?
The 20 mm adjuster is ideal when you need to share a spare across slight stroke variants or tune the end position on site. JSIJ mounting choices cover Basic, FA, LB, TC, TCM1, and TCM2. Because this unit lacks the -S suffix, it cannot accept a magnetic sensor. Even at this 80 mm stroke, guide the load to prevent side-load wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X80-20 FAQ
The theoretical maximum force is 801 kgf at 1.0 MPa. The air port size is G1/2.
The nominal 80 mm stroke is the maximum forward travel. An external stop screw lets you shorten the extend stroke by up to 20 mm on site, yielding a usable range of 60 to 80 mm. The retract end is fixed. This stop sets the end position and is not a load lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X80-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.