
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X80-40 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 80mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
The hard-anodized aluminium barrel is noticeably shorter than a same-bore ISO 15552 unit, saving machine space without losing power.
The JSIJ100X80-40 uses an external stop screw to shorten the extend stroke on-site by up to 40 mm, giving a usable forward range of 40 to 80 mm while the retract end stays fixed. This lets you fine-tune the end position without physically swapping the cylinder. Air connects via a G1/2 port, and adjustable air cushions of 33 mm at each end absorb shock. Note this SKU lacks a magnet, so it cannot take CMSE or DMSE sensors.
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X80-40 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Dial in the exact seating depth of a bearing on an assembly line by tweaking the 40 mm extend window instead of machining new spacers.
Act as an adjustable end-stop for mixed-product conveyor lines, shortening the 80 mm stroke on the fly to accommodate different carton lengths.
Push heavy pallets into a wrapping station, using the external adjuster to set the final push distance without changing the fixed retract position.
The 40 mm adjustable window is ideal when you need to share one spare cylinder across several stroke variants or dial in a precise end position on-site. Mounting options include FA, LB, TC, TCM1, and TCM2 brackets. Because this is a non-magnet SKU, you cannot fit position sensors; choose an -S variant if you need CMSE or DMSE switches. For any stroke over 300 mm, always use a guide rail to prevent side-load damage.
Quick checklist
At 0.5 MPa it pushes 3927 N and pulls 3574 N. At 0.7 MPa the push is 5497 N and the pull is 5003 N. The theoretical maximum force is 801 kgf at 1.0 MPa.
The nominal 80 mm extend stroke is the maximum. The external adjuster lets you shorten that forward stroke by up to 40 mm on-site, giving a usable range of 40 to 80 mm. The retract end remains fixed, and the adjuster only sets the end position—it does not lock the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.