Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X80-75S
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X80-75S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 80mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke80 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X80-75S
The nominal 80 mm stroke acts as the maximum, yielding a usable extend range of 5-80 mm while the retract end remains fixed. This on-site tuning lets you dial in the exact end position without swapping the cylinder. The extruded hard-anodized aluminium barrel omits tie rods entirely, making the body shorter and more compact than a same-bore ISO 15552 unit.
Featuring a built-in piston magnet, the -S suffix supports CMSE and DMSE reed or electronic switches that drop directly into the side grooves. The G1/2 port feeds the 32 mm rod, and adjustable 33 mm air cushions decelerate the load at both ends. Note that the cushion only decelerates; a plain cylinder drifts on air loss, so fit an external rod lock or pilot-operated check valve to hold a suspended load.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X80-75S Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X80-75S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X80-75S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X80-75S Is Used
Press Stroke Tuning
Dial in the exact 5-80 mm extend contact point on a light stamping or pressing station without machining new spacers.
Variable Transfer Stop
Adjust the stopper block position on the fly as product widths change on the line, using the 75 mm shortening window.
Pallet Positioning
Fine-tune the push-off distance for varying pallet depths before the transfer arm retracts at the fixed end.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X80-75S the Right Cylinder?
The adjustable stroke shines when you need to fine-tune the extend end position on the machine or standardize one spare across slight stroke variants. JSIJ mounting options include Basic, FA, LB, TC, TCM1, and TCM2. The -S magnet enables CMSE/DMSE sensors for position feedback. Because the stroke here is 80 mm, side-load risk is low, but for any stroke over 300 mm always guide the load to prevent rod bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X80-75S FAQ
At 0.5 MPa it pushes 3927 N and pulls 3574 N. At 0.7 MPa it pushes 5497 N and pulls 5003 N. The theoretical maximum is 801 kgf at 1.0 MPa. It uses a G1/2 port and a 32 mm rod with an M26x1.5 thread.
The nominal 80 mm stroke is the maximum extend length. An external stop screw lets you shorten that extend stroke by up to 75 mm on-site, giving a usable extend range of 5-80 mm. The retract end is fixed, and this mechanism sets the end position rather than locking the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X80-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.