Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X800-20
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X800-20 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 800mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke800 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X800-20
The hard-anodized aluminium barrel makes it shorter and more compact than a same-bore ISO 15552 unit. It features a G1/2 port and a 32 mm rod.
The external stop screw lets you trim the extend stroke by up to 20 mm on site, giving a usable range of 780 to 800 mm while the retract end stays fixed. This on-site tuning is ideal for shared spares across stroke variants. Note this SKU lacks a magnet and cannot take a CMSE or DMSE sensor. The air cushion only decelerates near stroke end; it will not hold a load on air loss, so fit an external rod lock for vertical safety.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X800-20 Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X800-20 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 800 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X800-20
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X800-20 Is Used
Heavy Pallet Diversion
Shifts loaded pallets along a transfer line, using the 20 mm adjuster to dial in the exact push-off distance without repositioning the cylinder mount.
Long-Reach Material Gate
Actuates an 800 mm stroke gating mechanism in a warehouse sorter, using the adjustable stop to synchronize the gate opening precisely with package sizes.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X800-20 the Right Cylinder?
The -20 mm adjustable window is invaluable for fine-tuning end positions without swapping the cylinder. Mounting options include FA, LB, TC, TCM1, and TCM2. Because this is an 800 mm stroke, you must support side loads with external guides to prevent rod bending. As a non-magnet SKU, it cannot host sensors; choose an -S variant if you need CMSE or DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X800-20 FAQ
At 0.5 MPa it pushes 3927 N and pulls 3574 N. At 0.7 MPa it pushes 5497 N and pulls 5003 N. The theoretical maximum force is 801 kgf at 1.0 MPa. It uses a G1/2 port and a 32 mm piston rod.
The nominal 800 mm stroke is the maximum. An external stop screw lets you shorten the extend stroke by up to 20 mm on site, giving a usable extend range of 780 to 800 mm. The retract end remains fixed. This stop only sets the end position; it does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X800-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.