Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X900-50
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X900-50 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 900mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke900 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X900-50
The extruded hard-anodized aluminium barrel omits tie rods, making the body shorter and more compact than a same-bore ISO 15552 unit.
The -50 code defines an external adjuster window that lets you shorten the extend stroke on-site by up to 50 mm, giving a usable extend range of 850-900 mm while the retract end stays fixed. You can fine-tune the end position without physically changing the cylinder. This SKU has no magnet and cannot take a CMSE/DMSE sensor; add the -S variant for position detection. It uses a G1/2 port, an M26x1.5 rod thread, and 33 mm adjustable air cushions at both ends.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X900-50 Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X900-50 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 900 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X900-50
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X900-50 Is Used
Heavy Material Transfer
Pushes loaded pallets along a 900 mm conveyor line, using the 50 mm adjuster to dial in the exact push-off distance without swapping actuators.
Large Press Ejection
Ejects heavy formed parts from a press bed, using the adjustable stroke to compensate for varying material thickness and tooling depths.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X900-50 the Right Cylinder?
The 50 mm adjustable window is ideal for sharing one spare across multiple stroke variants or finalizing end positions on-site. JSIJ mounting options include FA, LB, TC, TCM1, and TCM2. Because the stroke is 900 mm, you must use external guides to prevent rod bending and manage side loads. Note that a plain cylinder drifts on air loss; use an external rod lock or pilot-operated check valve for held loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X900-50 FAQ
At 0.5 MPa it pushes 3927 N and pulls 3574 N. At 0.7 MPa it pushes 5497 N and pulls 5003 N. The theoretical maximum is 801 kgf at 1.0 MPa. This 100 mm bore model uses a G1/2 port, an M26x1.5 rod thread, and 33 mm adjustable air cushions.
The nominal 900 mm stroke is the maximum. An external stop screw lets you shorten the extend stroke on-site by up to 50 mm, providing a usable extend range of 850-900 mm. The retract end is fixed. This mechanism sets the end position and does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X900-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.