Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-10
The AirTAC JSIJ32~50 Adjustable Cylinder JSIJ32X150-10 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø32mm bore and 150mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke150 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-10
The hard-anodized aluminum barrel leaves out external tie rods and measures shorter than a same-bore ISO 15552 unit, freeing up machine space.
An external adjuster lets you shorten the extend stroke by up to 10 mm on site, meaning the 150 mm nominal stroke can be fine-tuned down to 140 mm without swapping the cylinder. Pneumatic connections use a G1/8 port, and because this SKU lacks a magnet, it cannot take a CMSE or DMSE sensor.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-10 Technical Specifications
| Model | Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-10 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-10
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-10 Is Used
Small Part Ejection
Fine-tune the 10 mm extend window to dial in the exact push distance for knocking small plastic parts off a mold without recalculating fixed stops.
Transfer Diverter
Shorten the 150 mm stroke on site to position a diverter gate precisely over a narrow conveyor lane in a compact JIS footprint.
Is the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-10 the Right Cylinder?
The 10 mm adjustable window is ideal for sharing one spare across multiple stroke variants or finalizing end positions during machine commissioning. Mounting options include FA, LB, TC, TCM1, and TCM2. Because this code has no -S suffix, magnetic sensing is not supported. For any stroke at or over 300 mm, guide the load externally to prevent rod side-load wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-10 FAQ
At 0.5 MPa it pushes 402 N and pulls 345 N. At 0.7 MPa it pushes 563 N and pulls 483 N. The theoretical maximum force is 82 kgf at 1.0 MPa. The air port is G1/8.
The -10 means an external adjuster can shorten the extend stroke by up to 10 mm on site, giving a usable extend range of 140 to 150 mm, with the retract end fixed. This mechanism only sets the end position; it does not hold the load on air loss. For load holding, use an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.