Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-100
The AirTAC JSIJ32~50 Adjustable Cylinder JSIJ32X150-100 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø32mm bore and 150mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke150 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-100
The nominal 150 mm stroke represents the maximum travel, letting you fine-tune the end position down to a 50 mm usable extend without swapping the actuator. Its hard-anodized aluminum extruded barrel keeps the overall body more compact and shorter than a same-bore ISO 15552 unit.
It uses a G1/8 port, a 12 mm rod with an M10x1.25 thread, and 20 mm adjustable air cushions at both ends. Note that this specific SKU lacks a magnet and cannot accept CMSE or DMSE sensors; the -S variant is required for position detection.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-100 Technical Specifications
| Model | Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-100 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-100
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-100 Is Used
Short-Stroke Clamping
Dial the extend stroke down to 50 mm to clamp delicate electronics components without over-traveling, using the external adjuster for exact positioning.
Transfer Diverter
Fine-tune the pusher rod end position on-site to match varying package sizes on a packaging line, ensuring precise diverting without changing the cylinder.
Compact Test Fixture
Fit a shorter JIS-profile actuator into a tight test cell and adjust the extend stop to test multiple part heights using a single cylinder.
Is the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-100 the Right Cylinder?
The 100 mm adjustable window is ideal for sharing a single spare across multiple stroke variants or dialing in exact end positions on-site. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2. For any stroke at or above 300 mm, always use a guide to prevent side-load damage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-100 FAQ
The theoretical maximum force is 82 kgf at 1.0 MPa. It operates at speeds of 30-800 mm/s.
The external adjuster lets you shorten the extend stroke on-site by up to 100 mm from the 150 mm nominal maximum, giving a usable extend range of 50-150 mm. The retract end is fixed. This stop sets the end position and is not a load lock; use an external rod lock or pilot-operated check valve to hold a load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.