Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-30
The AirTAC JSIJ32~50 Adjustable Cylinder JSIJ32X150-30 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø32mm bore and 150mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke150 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-30
The hard-anodized aluminum barrel keeps the build noticeably shorter and more compact than a same-bore ISO 15552 unit.
The external adjuster lets you shorten the extend stroke by up to 30 mm on site, giving a usable range of 120 to 150 mm while the retract end stays fixed. You can fine-tune the end position without swapping the cylinder. The unit lacks a magnet, so this SKU cannot take a CMSE or DMSE sensor. Adjustable 20 mm air cushions at both ends decelerate the piston, but a plain cylinder does not hold load on air loss—use an external rod lock or pilot-operated check valve for held loads.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-30 Technical Specifications
| Model | Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-30 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-30
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-30 Is Used
Pick-and-Place Tweak
Dial in the exact 120 to 150 mm extend reach during machine commissioning without machining new hard stops.
Compact Assembly Press
Fit the short JIS profile body into a dense fixture and fine-tune the pressing depth on site with the external adjuster.
Is the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-30 the Right Cylinder?
This 32 mm bore sits at the low edge of the range, so if you need more push you can step up to the 40 mm bore (628 N at 0.5 MPa), or drop down if a smaller footprint is required. The 30 mm adjustable window is ideal for sharing one spare across multiple stroke variants or finalizing end positions during machine commissioning. JSIJ mounting options include FA, LB, TC, TCM1, and TCM2. Because this is a non-magnet SKU, it cannot take a sensor; add the -S variant for CMSE/DMSE switches. For any stroke over 300 mm, always guide the load to prevent side-load wear on the rod seals.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-30 FAQ
The theoretical maximum force is 82 kgf at 1.0 MPa. This 32 mm bore model uses a G1/8 air port and features a 12 mm rod with an M10x1.25 thread.
The 150 mm nominal stroke is the maximum length. The external adjuster lets you shorten the extend stroke by up to 30 mm on site, giving a usable extend range of 120 to 150 mm. The retract end remains fixed. This mechanism only sets the end position and does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.