Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-75
The AirTAC JSIJ32~50 Adjustable Cylinder JSIJ32X150-75 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø32mm bore and 150mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke150 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-75
The external adjuster lets you shorten the extend stroke by up to 75 mm, meaning your usable forward travel is 75-150 mm while the retract end stays fixed. You can fine-tune the end position without physically swapping the cylinder.
Built as a JIS-standard extruded hard-anodized aluminium profile unit, it is noticeably shorter than an ISO 15552 cylinder of the same bore. The air supply connects via a G1/8 port, and the adjustable air cushions provide 20 mm of deceleration at each end.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-75 Technical Specifications
| Model | Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-75 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-75
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-75 Is Used
Stopper Position Tuning
Dial in the exact 75-150 mm extend length on a diverter gate without machining a new stopper block.
Shared Spare Cylinder
Keep one adjustable unit in maintenance stock to cover multiple 32 mm bore machines with slightly different extend lengths.
Light Product Reject
Push small parts off a belt at 402 N, tweaking the extend reach on-site to match varying lane widths.
Is the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-75 the Right Cylinder?
The 75 mm adjust window is ideal when you need to share one spare cylinder across several stroke variants or dial in a precise end position on the machine. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2. Because this SKU lacks the -S suffix, it cannot take a magnetic sensor; add the -S variant for CMSE or DMSE switches. For any stroke over 300 mm, always guide the load to prevent side-load wear on the rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-75 FAQ
At 0.5 MPa it pushes 402 N and pulls 345 N. At 0.7 MPa it pushes 563 N and pulls 483 N. The theoretical maximum force is 82 kgf at 1.0 MPa. The rod is 12 mm with an M10x1.25 thread.
The nominal stroke is 150 mm, but an external stop screw lets you shorten the extend stroke by up to 75 mm on-site. This gives a usable extend range of 75-150 mm, while the retract end remains fixed. The stop sets the end position and does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X150-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.