Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X160-20S
The AirTAC JSIJ32~50 Adjustable Cylinder JSIJ32X160-20S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø32mm bore and 160mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke160 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X160-20S
The extruded hard-anodized aluminum body has no exposed tie rods, making it shorter and more compact than a same-bore ISO 15552 unit. The G1/8 port feeds the 12 mm rod, and adjustable 20 mm air cushions govern both ends.
The -20 code means an external stop screw lets you shorten the extend stroke on-site by up to 20 mm, giving a usable range of 140-160 mm while the retract end stays fixed. You can fine-tune the endpoint without swapping the cylinder. The -S suffix adds a piston magnet for CMSE/DMSE switches in the side grooves. Note that a standard cylinder drifts on air loss—the cushion only decelerates, so use an external rod lock for held loads.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X160-20S Technical Specifications
| Model | Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X160-20S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X160-20S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X160-20S Is Used
Clamp Position Trimming
Dial in the exact 140-160 mm clamping reach on a machining fixture using the external adjuster without disassembling the line.
Small Part Ejection
Push lightweight molded parts out of a press, tweaking the extend endpoint by up to 20 mm to accommodate varying product depths.
Transfer Stopper Gate
Act as an adjustable height stop gate on a conveyor, fine-tuning the blocking position on-site to match new pallet sizes.
Is the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X160-20S the Right Cylinder?
The adjustable stroke is ideal for sharing a spare across 140-160 mm stroke variants or fine-tuning a machine setup on-site. Mounting options include FA, LB, TC, TCM1, and TCM2 brackets. The built-in magnet supports CMSE/DMSE sensors. For this 160 mm stroke, ensure adequate guide support to prevent side-load wear on the 12 mm rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X160-20S FAQ
At 0.5 MPa it pushes 402 N and pulls 345 N. At 0.7 MPa it pushes 563 N and pulls 483 N. The theoretical maximum is 82 kgf at 1.0 MPa. The air port is G1/8.
The nominal 160 mm stroke is the maximum. An external stop screw lets you shorten the extend stroke by up to 20 mm on-site, yielding a usable extend range of 140-160 mm. The retract end remains fixed, and this stop only sets position—it is not a load lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X160-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.