Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-10
The AirTAC JSIJ32~50 Adjustable Cylinder JSIJ32X200-10 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø32mm bore and 200mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke200 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-10
The hard-anodized aluminum barrel keeps the build clean while the external adjuster lets you trim the extend stroke by up to 10 mm on site, dropping the usable travel from the 200 mm maximum down to 190 mm without swapping parts. Air connects via a G1/8 port.
This double-acting double-rod unit relies on a 20 mm adjustable air cushion at each end to decelerate the 12 mm rod, but the stop screw only sets the end position and will not hold the load if air drops. For a locked load you need an external rod lock or pilot-operated check valve. This SKU has no magnet, so it cannot take a CMSE or DMSE sensor.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-10 Technical Specifications
| Model | Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-10 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-10
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-10 Is Used
Gauge Position Trimming
Dial in the exact 190 to 200 mm extend reach for a gauging station using the external stop screw, avoiding mechanical shim changes.
Small Part Ejection
Push light 20 kg assemblies out of a fixture with 241 N of safe working force, tweaking the extend end point on site.
Compact Stopper Gate
Use the shorter JIS profile to fit a 32 mm bore stopper gate into a tight cell, adjusting the 10 mm window to match pallet height.
Is the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-10 the Right Cylinder?
The 10 mm extend-shortening window is ideal when you need to fine-tune a 190 to 200 mm end position on the machine or want one shared spare for several stroke variants. Mounting options include FA, LB, TC, TCM1 and TCM2 brackets. Because the 200 mm stroke is long for a 32 mm bore, always guide the load to prevent rod side-load. Add the -S option if you need CMSE or DMSE sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-10 FAQ
At 0.5 MPa it pushes 402 N and pulls 345 N. At 0.7 MPa it pushes 563 N and pulls 483 N. The theoretical max force is 82 kgf at 1.0 MPa. The air port is G1/8, the rod is 12 mm with an M10x1.25 thread, and it has a 20 mm adjustable cushion at each end.
The -10 code means an external adjuster lets you shorten the extend stroke by up to 10 mm on site. The nominal 200 mm stroke is the maximum, so usable extend travel is 190 to 200 mm. The retract end is fixed. This mechanism only sets the end position and does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.