Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-20S
The AirTAC JSIJ32~50 Adjustable Cylinder JSIJ32X200-20S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø32mm bore and 200mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke200 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-20S
The hard-anodized aluminum profile body is noticeably shorter than a same-bore ISO 15552 cylinder, saving valuable machine space.
The external adjuster allows you to shorten the extend stroke by up to 20 mm on-site, giving a usable range of 180-200 mm without swapping the cylinder. Because this is the -S variant, a built-in piston magnet works seamlessly with CMSE/DMSE sensors in the side grooves. Pneumatic connections use a G1/8 port, and the retract end remains fixed.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-20S Technical Specifications
| Model | Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-20S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-20S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-20S Is Used
Stopper Position Tuning
Fine-tune the 180-200 mm extend stop on-site to perfectly match varying product widths without changing the cylinder.
Light Diverter Arm
Handles about 241 N of real work, ideal for pushing small packages on a conveyor with precise end-position control.
Is the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-20S the Right Cylinder?
The adjustable stroke is perfect for fine-tuning end positions on-site or keeping a single spare cylinder for multiple stroke variants. Mounting options include FA, LB, TC, TCM1, and TCM2 brackets. For this 200 mm stroke, ensure external guide rails are used to prevent side-load wear on the rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-20S FAQ
This 32 mm bore cylinder pushes 402 N and pulls 345 N at 0.5 MPa, and pushes 563 N while pulling 483 N at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa. It uses a G1/8 port.
The nominal 200 mm stroke is the maximum. The external adjuster lets you shorten the extend stroke by up to 20 mm on-site, giving a usable range of 180-200 mm. The retract end is fixed, and this stop mechanism only sets position; it does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.