Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-40
The AirTAC JSIJ32~50 Adjustable Cylinder JSIJ32X200-40 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø32mm bore and 200mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke200 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-40
The hard-anodized aluminium barrel keeps the build light while the G1/8 port feeds the double-acting double rod.
The -40 code means an external adjuster can shorten the extend stroke on-site by up to 40 mm, giving a usable extend range of 160-200 mm without swapping the cylinder. This on-site tuning is perfect for dialing in exact end positions. Note this SKU lacks a magnet and cannot take a CMSE or DMSE sensor; a plain cylinder also drifts on air loss, so fit an external rod lock for held loads.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-40 Technical Specifications
| Model | Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-40 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-40
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-40 Is Used
Stop Position Trimming
Dial in the exact extend stop on a small clamping fixture by shortening the stroke up to 40 mm on-site.
Compact Part Ejection
Fit the short JIS profile body into tight machine frames to push lightweight parts off a conveyor.
Shared Spare Inventory
Keep one cylinder on the shelf and adjust the extend window from 160 to 200 mm to fit multiple stations.
Is the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-40 the Right Cylinder?
The adjustable stroke shines when you need to fine-tune the extend end position on-site or want one shared spare across slight stroke variants. Mounting options include FA, LB, TC, TCM1, and TCM2. For the 200 mm stroke, guide the load to prevent side-loading the rod. Because this is a non-S SKU, it cannot accept a magnetic sensor.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-40 FAQ
At 0.5 MPa it pushes 402 N and pulls 345 N. At 0.7 MPa it pushes 563 N and pulls 483 N. The theoretical max force is 82 kgf at 1.0 MPa. The air port is G1/8.
The nominal 200 mm stroke is the maximum. An external stop screw lets you shorten the extend stroke by up to 40 mm on-site, yielding a usable extend range of 160-200 mm. The retract end remains fixed, and the cushion only decelerates—it does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.