Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-75
The AirTAC JSIJ32~50 Adjustable Cylinder JSIJ32X200-75 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø32mm bore and 200mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke200 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-75
The extruded hard-anodized aluminium barrel omits external rods, making the overall body shorter and more compact than a same-bore ISO 15552 unit. A G1/8 port feeds the double-acting double-rod piston, while adjustable air cushions of 20 mm at each end absorb end-of-stroke shock.
The -75 code means an external stop screw lets you shorten the extend stroke on-site by up to 75 mm, dropping the usable extension from the 200 mm maximum down to 125 mm without swapping the cylinder. The retract end remains fixed. Note that this specific SKU lacks a magnet, so it cannot accept CMSE or DMSE sensors.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-75 Technical Specifications
| Model | Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-75 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-75
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-75 Is Used
Adjustable Stop Clamping
Clamps parts of varying widths on a single fixture by dialing the extend stroke down from 200 mm to 125 mm via the external adjuster.
Variable Length Diverter
Pushes packages on a belt where the required reach changes by up to 75 mm, letting operators set the exact stop position without changing hardware.
Compact Test Fixture
Fits into tight JIS-standard machinery bays where an ISO 15552 cylinder would be too long, providing precise 32 mm bore actuation.
Is the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-75 the Right Cylinder?
When sizing this 32 mm bore, the smaller edge means there is no lower neighbour, but stepping up to a 40 mm bore increases the 0.5 MPa push force to 628 N. Conversely, if 402 N is excessive, you would drop out of the JIS family. The adjustable stroke window is a major selection driver here: it lets you fine-tune the end position on-site or standardise one 200 mm spare across multiple stroke variants. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2. Because the 200 mm stroke exceeds 300 mm only marginally, side-load guiding is still recommended for stability. Remember that without a magnet, this version cannot host position sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-75 FAQ
This 32 mm bore cylinder uses a G1/8 port.
The 200 mm stroke is the maximum extension. The external stop screw lets you shorten the extend stroke on-site by up to 75 mm, giving a usable range of 125 to 200 mm. The retract end is fixed, and the cushion only decelerates; it does not hold the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X200-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.