Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X250-50S
The AirTAC JSIJ32~50 Adjustable Cylinder JSIJ32X250-50S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø32mm bore and 250mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke250 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X250-50S
The hard-anodized aluminum profile body is notably shorter than a same-bore ISO 15552 unit, saving valuable machine space. A built-in piston magnet comes standard, allowing CMSE or DMSE switches to drop directly into the side grooves for precise position detection.
The external stop screw lets you shorten the extend stroke by up to 50 mm on-site, giving a usable range of 200 to 250 mm without changing the cylinder itself. This makes it ideal for fine-tuning end positions or standardizing a shared spare across stroke variants.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X250-50S Technical Specifications
| Model | Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X250-50S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 250 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X250-50S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X250-50S Is Used
End-Stop Tuning
Fine-tune the extend position of a small clamping jaw on-site by dialing the 50 mm window, avoiding mechanical redesign.
Shared Spare Pooling
Keep one 250 mm cylinder in stock and adjust it down to 200 mm to cover multiple stroke variants across a packaging line.
Compact Diverter
Fit the short JIS profile body into tight transfer stations to push light 20 kg product loads between belts.
Is the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X250-50S the Right Cylinder?
The adjustable stroke is a major advantage when you need to tune end positions in the field or want one spare to cover slight stroke variations. Mounting options include FA, LB, TC, TCM1, and TCM2. The -S suffix means the magnet is already present for sensors. Because the stroke is 250 mm, ensure adequate side-load guidance to prevent rod binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X250-50S FAQ
This 32 mm bore cylinder uses a G1/8 port.
An external stop screw shortens the extend stroke by up to 50 mm on-site, giving a usable range of 200 to 250 mm. The nominal 250 mm is the maximum, and the retract end remains fixed. This mechanism sets the end position and is not a load lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X250-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.