Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X300-30S
The AirTAC JSIJ32~50 Adjustable Cylinder JSIJ32X300-30S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø32mm bore and 300mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke300 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X300-30S
Its hard-anodized aluminum extruded barrel makes it shorter and more compact than a same-bore ISO 15552 unit. The G1/8 port feeds the double-acting double rod, and the integrated magnet (-S) supports CMSE/DMSE sensors in the side grooves.
The external adjuster lets you trim the extend stroke by up to 30 mm on site, giving a usable range of 270-300 mm without swapping the cylinder. Note that the air cushion only decelerates the piston; use an external rod lock or pilot-operated check valve to hold a load securely.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X300-30S Technical Specifications
| Model | Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X300-30S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X300-30S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X300-30S Is Used
Stopper Position Trimming
Dial in the 270-300 mm extend stop on a small clamping fixture without machining a new hard stop.
Shared Spare Cylinder
Keep one unit as a plant spare, shortening the extend stroke by up to 30 mm to fit multiple 32 mm machines.
Is the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X300-30S the Right Cylinder?
The 30 mm adjustable window is ideal for fine-tuning end positions on site or sharing a spare across stroke variants. You can mount it via Basic, FA, LB, TC, TCM1, or TCM2 brackets. Because the 300 mm stroke invites rod bending, always use an external guide to absorb side loads. The -S magnet enables CMSE/DMSE switches for position feedback.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X300-30S FAQ
At 0.5 MPa it pushes 402 N and pulls 345 N. At 0.7 MPa it pushes 563 N and pulls 483 N. The theoretical max is 82 kgf at 1.0 MPa. The air port is G1/8.
The nominal 300 mm stroke is the maximum. An external stop screw lets you shorten the extend stroke by up to 30 mm on site, yielding a usable range of 270-300 mm. The retract end remains fixed.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X300-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.