Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X300-50S
The AirTAC JSIJ32~50 Adjustable Cylinder JSIJ32X300-50S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø32mm bore and 300mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke300 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X300-50S
The hard-anodized aluminum extruded barrel keeps the assembly light, while the G1/8 port matches the bore size.
The -50 code means an external adjuster can shorten the 300 mm extend stroke on site by up to 50 mm, yielding a usable 250-300 mm range without changing the cylinder itself. The -S suffix adds a built-in piston magnet for CMSE/DMSE switches in the side grooves. Note that the air cushion only decelerates the piston near the ends; for load holding on air loss you need an external rod lock or pilot-operated check valve.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X300-50S Technical Specifications
| Model | Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X300-50S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X300-50S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X300-50S Is Used
End-Stop Tuning
Fine-tune the extend position of a small clamping jaw on site across a 250-300 mm window without swapping cylinders.
Compact Sorting
Fits into tight machinery spaces thanks to the JIS profile build, pushing light parts with 402 N at 0.5 MPa.
Is the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X300-50S the Right Cylinder?
Stepping down is not an option here. The adjustable stroke is ideal for fine-tuning the extend end position on site or keeping one shared spare for slightly different stroke variants. Mounting options include FA, LB, TC, TCM1, and TCM2 brackets. Because the 300 mm stroke creates leverage, always use an external guide to prevent rod bending and side loads. The -S magnet enables CMSE/DMSE sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X300-50S FAQ
This 32 mm bore cylinder pushes 402 N and pulls 345 N at 0.5 MPa. At 0.7 MPa it pushes 563 N and pulls 483 N. The theoretical maximum force is 82 kgf at 1.0 MPa. It uses a G1/8 air port and features a 12 mm rod with an M10x1.25 thread.
The nominal 300 mm extend stroke is the maximum. An external stop screw lets you shorten the extend stroke on site by up to 50 mm, giving a usable range of 250-300 mm. The retract end remains fixed. This stop sets the end position and does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X300-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.