Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X350-10S
The AirTAC JSIJ32~50 Adjustable Cylinder JSIJ32X350-10S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø32mm bore and 350mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke350 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X350-10S
The hard-anodized aluminum barrel makes it shorter and more compact than a same-bore ISO 15552 unit.
A built-in magnet (-S) supports CMSE/DMSE sensors in the side grooves for position detection. The external adjuster lets you shorten the extend stroke by up to 10 mm on site, giving a usable range of 340-350 mm without changing the cylinder itself. Pneumatic connections use a G1/8 port, and the retract end remains fixed.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X350-10S Technical Specifications
| Model | Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X350-10S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X350-10S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X350-10S Is Used
Stopper Position Trimming
Fine-tune the 10 mm extend window on a 350 mm stroke to dial in the exact parts-stopping point without remounting the actuator.
Compact Push Stations
Fits into tight JIS-profile machinery spaces where an ISO 15552 cylinder would be too long, offering 340-350 mm of extend movement.
Is the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X350-10S the Right Cylinder?
The 10 mm adjustable window is ideal for sharing a spare across stroke variants or fine-tuning end positions. Mounting options include FA, LB, TC, TCM1, and TCM2. The -S variant includes a magnet for CMSE/DMSE switches. Because the stroke is 350 mm, always use an external guide to prevent rod bending and side loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X350-10S FAQ
The theoretical maximum force is 82 kgf at 1.0 MPa. The air port size is G1/8.
The nominal 350 mm stroke is the maximum. An external stop screw lets you shorten the extend stroke by up to 10 mm on site, yielding a usable range of 340-350 mm. The retract end is fixed. This mechanism only sets the end position and does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X350-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.