Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X350-40S
The AirTAC JSIJ32~50 Adjustable Cylinder JSIJ32X350-40S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø32mm bore and 350mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke350 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X350-40S
The hard-anodized aluminum extrusion omits tie rods entirely, and the G1/8 port keeps the pneumatic footprint tight.
The -40 code means an external adjuster can shorten the extend stroke on-site by up to 40 mm, giving a usable range of 310-350 mm without changing the cylinder itself. Because this is an -S SKU, a built-in piston magnet lets you drop CMSE or DMSE reed and electronic switches straight into the side grooves. Note that the retract end remains fixed, and the adjustable cushion only decelerates the piston rather than holding a load.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X350-40S Technical Specifications
| Model | Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X350-40S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X350-40S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X350-40S Is Used
Gauge Position Trimming
Dial in the exact extend reach within the 310-350 mm window on-site to align a measurement gauge without swapping actuators.
Transfer Stopper Finesse
Act as an adjustable stop fence on a conveyor, shortening the extend stroke by up to 40 mm to accommodate different product widths.
Is the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X350-40S the Right Cylinder?
When sizing this unit, step down to a 32 mm bore for lighter duties or up to a 40 mm bore for 628 N at 0.5 MPa if you need more push. The 40 mm on-site extend-shortening window is ideal for fine-tuning end positions across shared spare cylinders. You can mount it via FA, LB, TC, TCM1, or TCM2 brackets. Because the 350 mm stroke creates leverage, always support the rod against side-load bending with an external guide. Remember that a plain cylinder drifts on air loss; use an external rod lock or pilot-operated check valve for held loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X350-40S FAQ
At 0.5 MPa it pushes 402 N and pulls 345 N. At 0.7 MPa it pushes 563 N and pulls 483 N. The theoretical maximum force is 82 kgf at 1.0 MPa. It uses a G1/8 port and a 12 mm rod.
The nominal 350 mm stroke is the maximum. The external adjuster lets you shorten the extend stroke on-site by up to 40 mm, yielding a usable range of 310-350 mm. The retract end is fixed, and the stop only sets position rather than locking the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X350-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.