Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X50-10
The AirTAC JSIJ32~50 Adjustable Cylinder JSIJ32X50-10 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø32mm bore and 50mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke50 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X50-10
The nominal 50 mm stroke remains the maximum travel, yielding a usable 40-50 mm extend range, while the retract end stays fixed. Built with an extruded hard-anodized aluminum barrel, the body is noticeably shorter and more compact than a same-bore ISO 15552 unit. Air connections use a G1/8 port, and adjustable air cushions of 20 mm decelerate the piston at both ends.
This double-acting double-rod actuator operates at 30-800 mm/s within a 0.15-1.0 MPa pressure range. Because this specific SKU lacks the -S magnet option, it cannot accept CMSE or DMSE sensors for position detection. Note that the adjustable stop sets the end position but does not lock the load; a plain cylinder drifts on air loss, so fit an external rod lock or pilot-operated check valve if you need to hold a suspended weight.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X50-10 Technical Specifications
| Model | Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X50-10 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X50-10
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X50-10 Is Used
Pick-and-Place End Tuning
Dial in the exact 40-50 mm extend reach for a small gripper arm on an assembly line using the external adjuster, ensuring parts seat perfectly without reprogramming the machine.
Carton Flap Folding
Push light cardboard flaps into position during a sealing process, using the shorter JIS profile to fit the actuator neatly within a tight conveyor framework.
Shared Spare Inventory
Keep one 50 mm nominal stroke cylinder as a universal replacement for 45 mm or 48 mm applications, simply backing the stop screw out to match the required travel on-site.
Is the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X50-10 the Right Cylinder?
The 10 mm adjustable window is highly useful for sharing a single spare cylinder across multiple stroke variants or fine-tuning the final end position on-site without mechanically remounting the unit. You can mount it using FA, LB, TC, TCM1, or TCM2 brackets. For any stroke length of 300 mm or more, always use a dedicated external guide rail to prevent excessive side-loading on the 12 mm piston rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X50-10 FAQ
The theoretical maximum force is 82 kgf at 1.0 MPa. It features a 12 mm rod, M10x1.25 rod thread, G1/8 port, and 20 mm adjustable cushions at both ends.
The -10 code indicates an external stop screw that shortens the extend stroke by up to 10 mm on-site. The nominal 50 mm stroke is the maximum, giving a usable extend range of 40-50 mm, while the retract end remains fixed. This mechanism only sets the end position and does not function as a load lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X50-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.