Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X500-40
The AirTAC JSIJ32~50 Adjustable Cylinder JSIJ32X500-40 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø32mm bore and 500mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke500 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X500-40
The hard-anodized aluminium barrel contains no external rods, keeping the 32 mm body clean and smooth. A G1/8 port supplies air, driving the 12 mm rod at speeds of 30-800 mm/s.
The external adjuster lets you trim the extend stroke by up to 40 mm on-site, giving a usable 460-500 mm range while the retract end stays fixed. This plain SKU lacks a magnet, so it cannot take CMSE/DMSE sensors.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X500-40 Technical Specifications
| Model | Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X500-40 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X500-40
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X500-40 Is Used
Gauge Position Trimming
Dial in the exact 460-500 mm extend reach on a part inspection station without machining new hard stops.
Transfer Stroke Tuning
Shorten the pusher stroke by 40 mm on-site to accommodate a slightly narrower product package on the line.
Shared Spare Inventory
Keep one cylinder as a universal backup for 460 mm to 500 mm extend applications, adjusting the stop screw during installation.
Is the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X500-40 the Right Cylinder?
If you need less force, there is no smaller standard JSIJ bore. The 40 mm adjuster window is ideal for sharing one spare across multiple stroke variants or tuning end positions on-site. Mounting options include FA, LB, TC, TCM1, and TCM2. Because this is a 500 mm stroke, always use an external guide to prevent rod bending under side loads. Add the -S suffix if you need CMSE/DMSE sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X500-40 FAQ
At 0.5 MPa it pushes 402 N and pulls 345 N. At 0.7 MPa it pushes 563 N and pulls 483 N. The theoretical maximum is 82 kgf at 1.0 MPa. The air port is G1/8.
An external stop screw shortens the extend stroke by up to 40 mm on-site, giving a usable range of 460-500 mm. The nominal 500 mm stroke is the maximum, and the retract end is fixed. This mechanism sets the end position but does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X500-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.