Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X60-30S
The AirTAC JSIJ32~50 Adjustable Cylinder JSIJ32X60-30S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø32mm bore and 60mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke60 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X60-30S
The hard-anodized aluminum extruded barrel makes the body more compact than a same-bore ISO 15552 cylinder.
The -30 code defines that external adjuster window, while the -S suffix adds a built-in piston magnet for CMSE/DMSE switches that drop directly into the side grooves. A standard unit does not hold a load on air loss, as the adjustable air cushions only decelerate the piston near the ends. For secure load holding, pair it with an external rod lock or a pilot-operated check valve.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X60-30S Technical Specifications
| Model | Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X60-30S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X60-30S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X60-30S Is Used
Clamp Position Tuning
Dial in the exact clamping reach on small machining fixtures by shortening the extend stroke from 60 mm down to 30 mm directly at the machine.
Small Parts Ejection
Eject lightweight molded components from a tight space, relying on the compact JIS profile barrel to fit where standard cylinders cannot.
Sensor Positioning
Use the -S magnet with CMSE/DMSE switches to confirm part ejection, adjusting the physical stroke window to match varying product widths.
Is the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X60-30S the Right Cylinder?
The adjustable stroke is ideal for fine-tuning end positions on-site or keeping a shared spare across stroke variants. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2. The -S magnet supports CMSE/DMSE sensors. Because this 60 mm stroke is short, side-load guides are less critical here, but always guide the rod for any stroke reaching 300 mm or more.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X60-30S FAQ
This 32 mm bore cylinder pushes 402 N and pulls 345 N at 0.5 MPa, pushes 563 N and pulls 483 N at 0.7 MPa, with a theoretical max of 82 kgf at 1.0 MPa. It uses a G1/8 air port and a 12 mm rod with an M10x1.25 thread.
The 60 mm nominal stroke is the maximum extend length. The external adjuster lets you shorten the extend stroke on-site by up to 30 mm, giving a usable extend range of 30-60 mm. The retract end remains fixed, and this mechanism sets the end position rather than locking the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X60-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.