Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X75-10S
The AirTAC JSIJ32~50 Adjustable Cylinder JSIJ32X75-10S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø32mm bore and 75mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke75 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X75-10S
It is noticeably shorter than a same-bore ISO 15552 unit. The hard-anodized aluminum barrel uses no external tie rods, and the G1/8 port keeps air plumbing tidy.
An external stop screw lets you trim the extend stroke by up to 10 mm on site, giving a usable 65-75 mm forward travel while the retract end stays fixed. You can fine-tune the end position without swapping the cylinder. The built-in magnet (-S) accepts CMSE or DMSE sensors in the side grooves for position feedback.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X75-10S Technical Specifications
| Model | Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X75-10S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X75-10S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X75-10S Is Used
Pick-and-Place Trimming
Dial in the 65-75 mm extend stop on site to match varying product heights without machining new hard stops.
Divert Gate Adjustment
Fine-tune the gate extension window by 10 mm to handle slightly different carton widths on the line.
Compact Part Ejection
Fit the short JIS profile body into tight machine frames to push lightweight parts safely.
Is the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X75-10S the Right Cylinder?
The adjustable stroke is ideal when you need to share one spare across multiple stroke variants or dial in an end position on the fly. Mounting options include FA, LB, TC, TCM1, and TCM2. The -S magnet supports CMSE/DMSE switches. For any stroke at or over 300 mm, use a guide rail to prevent side-load damage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X75-10S FAQ
At 0.5 MPa it pushes 402 N and pulls 345 N. At 0.7 MPa it pushes 563 N and pulls 483 N. The theoretical maximum is 82 kgf at 1.0 MPa. The air port is G1/8.
The nominal 75 mm stroke is the maximum. An external stop screw lets you shorten the extend stroke by up to 10 mm on site, giving a usable range of 65-75 mm. The retract end is fixed. This mechanism sets the end position but does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X75-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.