Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X80-10
The AirTAC JSIJ32~50 Adjustable Cylinder JSIJ32X80-10 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø32mm bore and 80mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke80 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X80-10
The hard-anodized aluminum profile barrel makes it shorter than a same-bore ISO 15552 cylinder.
The external adjuster lets you shorten the extend stroke on site by up to 10 mm, giving a usable range of 70-80 mm without changing the cylinder itself. The retract end remains fixed. This unit uses a G1/8 port and an M10x1.25 rod thread. Because this SKU lacks a magnet, it cannot take a CMSE or DMSE sensor.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X80-10 Technical Specifications
| Model | Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X80-10 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X80-10
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X80-10 Is Used
Pick-and-Place Refinement
Fine-tune the 80 mm extend end-point by up to 10 mm on-site to dial in exact grip placement without swapping actuators.
Small Part Ejection
Use the adjustable stop to set a precise ejection distance for delicate components, preventing over-travel damage.
Shared Spare Inventory
Keep one cylinder as a backup for multiple 70-80 mm stroke stations, adjusting the external screw to match each fixture.
Is the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X80-10 the Right Cylinder?
When sizing this 32 mm bore, step up to the 40 mm bore if you need more force, or down if the load is lighter. The 10 mm adjuster is ideal for sharing a spare cylinder across slightly different stroke variants or fine-tuning the end position on the machine. JSIJ mounting options include FA, LB, TC, TCM1, and TCM2. If your stroke exceeds 300 mm, add an external guide to prevent side-load damage. To add position sensing, select the -S magnet version for CMSE/DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X80-10 FAQ
The theoretical maximum force is 82 kgf at 1.0 MPa.
The 10 indicates an external adjuster window that lets you shorten the extend stroke by up to 10 mm on site. The nominal 80 mm stroke is the maximum, giving a usable extend range of 70-80 mm, while the retract end is fixed.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X80-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.