Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X80-10S
The AirTAC JSIJ32~50 Adjustable Cylinder JSIJ32X80-10S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø32mm bore and 80mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke80 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X80-10S
The integrated G1/8 port keeps air routing tight, and the built-in magnet allows CMSE/DMSE sensors to drop directly into the side grooves for precise position detection.
A core benefit is the external stop screw that lets you shorten the extend stroke on-site by up to 10 mm, giving a usable forward range of 70 to 80 mm without changing the cylinder itself. This on-site end-position tuning is ideal for dialing in a shared spare across stroke variants. Remember the retract end is fixed, and the adjustable cushion only decelerates the piston rather than locking the load.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X80-10S Technical Specifications
| Model | Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X80-10S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X80-10S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X80-10S Is Used
Clamp Position Trimming
Fine-tune the clamping reach by up to 10 mm on-site to accommodate different material thicknesses without swapping the actuator.
Small Part Ejection
Dial in the exact ejection distance between 70 and 80 mm to ensure small components clear the mold without crashing into downstream guides.
Sensor Calibration Rig
Leverage the side-groove CMSE/DMSE switches and the adjustable forward stop to set precise testing endpoints for lightweight 20 kg vertical lift fixtures.
Is the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X80-10S the Right Cylinder?
When sizing this unit, look at the neighboring bores: a 40 mm bore raises the 0.5 MPa push force to 628 N, while there is no smaller JSIJ option. The 10 mm adjustable window is highly useful when you need fine end-position tuning on the machine or want a single spare part covering slight stroke variations. Mounting options include FA, LB, TC, TCM1, and TCM2 brackets. The -S suffix ensures you have the piston magnet for electronic or reed switches. For any stroke at or above 300 mm, always use a guide rail to prevent side-load damage to the rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X80-10S FAQ
This 32 mm bore cylinder has a G1/8 port.
The external stop screw lets you shorten the extend stroke by up to 10 mm on-site, providing a usable forward range of 70 to 80 mm while the nominal 80 mm remains the maximum. The retract end is fixed, and this mechanism sets the end position rather than holding the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X80-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.