Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X80-75
The AirTAC JSIJ32~50 Adjustable Cylinder JSIJ32X80-75 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø32mm bore and 80mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke80 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X80-75
The G1/8 port feeds a double-acting double-rod mechanism rated for 30-800 mm/s speeds.
The external adjuster lets you shorten the extend stroke by up to 75 mm on-site, dropping the usable forward travel from the 80 mm maximum down to 5 mm without changing the cylinder. Note this plain SKU lacks a magnet and cannot take a sensor.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X80-75 Technical Specifications
| Model | Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X80-75 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X80-75
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X80-75 Is Used
Short-Stroke Clamping
Dial the 80 mm nominal stroke down to a 10 mm clamping travel using the external adjuster, ensuring precise material hold without repositioning the entire fixture.
Compact Part Ejection
Fit the short JIS profile body into tight machine cavities to push small parts, fine-tuning the ejection distance anywhere from 5 to 80 mm on the fly.
Adjustable Stop Positioning
Use the 75 mm adjuster window to set multiple extend endpoints for a shared spare cylinder, accommodating various product sizes on a single conveyor line.
Is the Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X80-75 the Right Cylinder?
The adjustable stroke is ideal for tuning end positions on-site or sharing one spare across multiple stroke variants. Mounting options include FA, LB, TC, TCM1, and TCM2. Because this SKU lacks the -S suffix, it cannot accept CMSE/DMSE sensors. For any stroke over 300 mm, always guide the load to prevent side-load damage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X80-75 FAQ
This 32 mm bore cylinder uses a G1/8 port.
The 80 mm nominal stroke is the maximum forward travel. The external adjuster lets you shorten the extend stroke on-site by up to 75 mm, giving a usable range of 5 to 80 mm. The retract end remains fixed, and the adjuster sets end position rather than holding the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ32~50 Adjustable Cylinder JSIJ32X80-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.