
The AirTAC MIC Cushioned Mini Cylinder MIC32X200CMH is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 200mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavier workloads with ease. The 32 mm bore uses a 1/8 inch air port and a 12 mm piston rod to generate 563 N at 0.7 MPa, peaking at an 82 kgf theoretical maximum. It carries a CM round rear cover for straightforward port orientation and ships with Viton high-temperature seals to survive hotter environments than standard rubber.
A defining trait of the MIC line is the needle-adjustable air cushion at both ends, which soaks up kinetic energy at the stroke extremes to protect your payload from high-speed shock. The stainless-steel barrel and rod resist mild corrosion and washdown.
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X200CMH |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Uses the 402.2 N push force to deflect heavy baked goods or heated molded parts on a conveyor, leveraging the Viton seals to withstand ambient oven radiating heat.
Cycles rapidly at up to 800 mm/s to press carton flaps, relying on the adjustable end cushions to prevent jarring impacts that could damage the packaging mechanics.
Lifts a 20 kg applicator head smoothly over a 200 mm travel, using the stainless construction to endure dusty, mildly humid distribution center environments.
If 402.2 N is excessive, the smaller Ø25 bore provides 245.3 N of push at 0.5 MPa; stepping up to the Ø40 bore yields 628.3 N for heavier demands. The adjustable cushion proves its worth when cycling at high speeds or moving substantial masses, allowing you to tune the deceleration curve precisely. Because this is a non-magnet SKU, it cannot accept CMSG, DMSG, or EMSG sensors — choose the -S variant if you require position detection.
Keep in mind the cushion only decelerates the piston near the stroke end and acts purely as a shock absorber, never as a brake. If your application must hold a load vertically during air loss or valve centering, the piston will drift, requiring an external rod lock or pilot-operated check valve. You can mount this unit using LB foot, FA flange, SDB pivot, or TC trunnion brackets.
Quick checklist
This 32 mm bore cylinder features a 1/8 inch air port and a 12 mm rod. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, increasing to 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
No, this specific SKU lacks the internal magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You must select the -S variant to enable sensing. The adjustable air cushions and Viton seals function identically regardless of the magnet option.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.