
The AirTAC MIC Cushioned Mini Cylinder MIC32X500CMH is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 500mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Engineered for heavy-duty linear motion, the AirTAC MIC32X500CMH is a double-acting round-body stainless steel mini cylinder. It generates 402.2 N of push force and 345.6 N of pull force at 0.5 MPa, peaking at an 82 kgf theoretical maximum at 1.0 MPa. The 1/8 inch port and M10x1.25 male rod thread ensure robust pneumatic and mechanical connections for demanding setups.
Unlike basic bumper models, this unit features an adjustable air cushion at both ends. You can tune the needle valve to absorb end-of-stroke shock at high speeds, protecting your payload and reducing noise. The stainless barrel and rod resist mild corrosion and washdown environments, while the -H designation equips it with Viton seals for elevated thermal demands. Without the -S suffix, this specific SKU lacks a magnet and cannot host CMSG, DMSG, or EMSG sensors.
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X500CMH |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Ideal for rapidly actuating heavy diverter arms on packaging lines, where the adjustable cushion absorbs the 402.2 N push impact over the long 500 mm travel.
Perfect for extending palletizing stops or gates over wider conveyors, utilizing the full 500 mm stroke and robust 32 mm bore to manage substantial inertial loads.
With a 500 mm stroke, this 32 mm bore cylinder hits the maximum standard stroke limit, making it ideal for long-travel tasks. If you need less force, stepping down to the MIC25X50 yields 245.3 N push at 0.5 MPa. If your application requires more power, the larger MIC40X50 provides 628.3 N. The adjustable cushion is essential when moving heavy loads at high velocities, though it only decelerates the piston near the end caps and acts purely as a shock absorber, never as a braking lock.
Because this is a non-magnetic SKU, position sensing is unavailable unless you upgrade to an -S variant. The CM round end cover dictates the rear mounting orientation, and you can utilize LB foot, FA flange, SDB pivot, or TC trunnion brackets for versatile installation. Note that a standard double-acting cylinder will drift if air pressure drops; for strict load holding on air loss, install an external rod lock or a pilot-operated check valve.
Quick checklist
This 32 mm bore cylinder features a 1/8 inch port and delivers 402.2 N push / 345.6 N pull at 0.5 MPa, and 563 N push / 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
No, this specific SKU lacks the -S magnet, so it cannot accept CMSG, DMSG, or EMSG switches. The -H indicates Viton seals for high-temperature resistance, and the adjustable air cushions at both ends help decelerate loads smoothly.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.