Airtac PBD Pen-shaped Double Rod Cylinder PBD10X160
The AirTAC PBD Pen-shaped Double Rod Cylinder PBD10X160 is a double-acting pen-size mini cylinder with a piston rod protruding from both covers. The twin rods share one piston, giving equal push and pull force, resisting rotation and providing a spare mounting or sensing end on a Ø10mm bore, 160mm stroke.
- BoreØ10 mm
- Stroke160 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM8×1.0
- ForceEqual both ways
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PBD Pen-shaped Double Rod Cylinder PBD10X160
The AirTAC PBD10X160 is a double-acting, double-rod pen-size mini cylinder featuring a 10mm bore and a 160mm stroke. Because a rod exits both covers sharing one piston, push and pull forces are perfectly equal at 33 N at 0.5 MPa. The twin rods resist twist better than a single rod, providing stable guidance for symmetric duty cycles.
This configuration uses an M5x0.8 air port and an M8x1.0 rod-end thread. The slim SUS304 stainless body saves space in tight jigs, while fixed TPU bumpers at each end decelerate the piston near stroke limits. Note that the 160mm stroke exceeds the 100mm standard maximum for this bore, making it a non-standard, made-to-order item.
Airtac PBD Pen-shaped Double Rod Cylinder PBD10X160 Technical Specifications
| Model | Airtac PBD Pen-shaped Double Rod Cylinder PBD10X160 |
|---|---|
| Series | PBD JIS pen-size double-rod cylinder |
| Bore size | Ø10 mm |
| Rod diameter | Ø4 mm (both ends) |
| Stroke | 160 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Both chambers act on the rod-side annular area, so push and pull forces are equal. Piston rod and barrel are stainless steel. Confirm against the product label before installation.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 33.0 N | 33.0 N |
| 0.7 MPa (max) | 46.2 N | 46.2 N |
Because a rod occupies both chambers, the effective area is identical on each side — push and pull forces match. Values are from the AirTAC thrust table (rod-side / pull column). Size with a friction margin.
Model Code: Airtac PBD Pen-shaped Double Rod Cylinder PBD10X160
| PBD | JIS pen-size double-rod mini-cylinder series. |
|---|---|
| 10 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
Fixed body — no separate back-cover code. Mounting accessories: LB, FA. Related PB-family variants: PB (single rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PBD Pen-shaped Double Rod Cylinder PBD10X160 Is Used
Dual-Side Transfer
Pushes a part one way and pulls it back with identical 33N force, using the second rod end to mount a synchronized transfer fork without extra hardware.
Symmetric Clamp
Twin rods resist rotational twist during clamping, keeping the jaw aligned while applying equal pressure in both extend and retract directions.
Sensor-Flagged Index
Uses the spare rod end to carry an external stop or flag, triggering a mechanical limit reliably while the primary side drives the tooling.
Is the Airtac PBD Pen-shaped Double Rod Cylinder PBD10X160 the Right Cylinder?
Sizing this model requires checking both neighbors: the 6mm bore yields 10.6 N, while the 16mm bore provides 90.7 N at 0.5 MPa. This 10mm bore gives 33 N both ways, making it the ideal middle ground for moderate pull-dominant tasks.
When laying out your machine, remember both ends require rod clearance across the full 160mm travel. The thin Ø4mm rod handles coaxial thrust well, but over this long stroke you should add an external linear bearing to prevent side-load deflection. Confirm your ordering essentials: 10mm bore, 160mm non-standard stroke, no magnet, and your preferred mount.
Quick checklist
- ✓ Need equal force in both directions
- ✓ Second rod end for a sensor / stop / flag
- ✓ Better anti-rotation than a single rod
- ✓ Magnet (S) for sensors?
- ✓ Clearance for the rod on both ends
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Leave clearance for the rod at both ends.
- check Keep the load coaxial; avoid side load on the thin rods.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
Airtac PBD Pen-shaped Double Rod Cylinder PBD10X160 FAQ
This cylinder provides equal push and pull forces of 33 N at 0.5 MPa and 46.2 N at 0.7 MPa. The maximum operating pressure is 0.7 MPa.
No, a plain double-acting cylinder drifts when air is lost. The fixed TPU bumpers only decelerate the piston near the stroke ends; they do not lock the rod. You must use an external stop or rod lock for fail-safe holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PBD Pen-Size Cylinders
Request a Quote for Airtac PBD Pen-shaped Double Rod Cylinder PBD10X160
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.