Airtac PBD Pen-shaped Double Rod Cylinder PBD10X160S
The AirTAC PBD Pen-shaped Double Rod Cylinder PBD10X160S is a double-acting pen-size mini cylinder with a piston rod protruding from both covers. The twin rods share one piston, giving equal push and pull force, resisting rotation and providing a spare mounting or sensing end on a Ø10mm bore, 160mm stroke.
- BoreØ10 mm
- Stroke160 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM8×1.0
- ForceEqual both ways
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PBD Pen-shaped Double Rod Cylinder PBD10X160S
The AirTAC PBD10X160S is a double-acting, double-rod pen-size mini cylinder with a 10 mm bore and 160 mm stroke. A piston rod protrudes from both covers on a single piston. Because both chambers act on the identical rod-side annular area, the unit delivers an equal 33 N of push and pull force at 0.5 MPa. The slim SUS304 stainless body saves space in tight jigs.
Twin rods share one piston to resist twist better than a single rod, while providing a spare end for a sensor flag or second tool. This unit includes a built-in piston magnet for position sensing. The 160 mm stroke exceeds the 100 mm standard maximum for this 10 mm bore, making it a non-standard, made-to-order configuration. It uses an M5x0.8 air port and features a fixed TPU bumper at each end that decelerates the last few millimeters of travel.
Airtac PBD Pen-shaped Double Rod Cylinder PBD10X160S Technical Specifications
| Model | Airtac PBD Pen-shaped Double Rod Cylinder PBD10X160S |
|---|---|
| Series | PBD JIS pen-size double-rod cylinder |
| Bore size | Ø10 mm |
| Rod diameter | Ø4 mm (both ends) |
| Stroke | 160 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Both chambers act on the rod-side annular area, so push and pull forces are equal. Piston rod and barrel are stainless steel. Confirm against the product label before installation.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 33.0 N | 33.0 N |
| 0.7 MPa (max) | 46.2 N | 46.2 N |
Because a rod occupies both chambers, the effective area is identical on each side — push and pull forces match. Values are from the AirTAC thrust table (rod-side / pull column). Size with a friction margin.
Model Code: Airtac PBD Pen-shaped Double Rod Cylinder PBD10X160S
| PBD | JIS pen-size double-rod mini-cylinder series. |
|---|---|
| 10 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
Fixed body — no separate back-cover code. Mounting accessories: LB, FA. Related PB-family variants: PB (single rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PBD Pen-shaped Double Rod Cylinder PBD10X160S Is Used
Dual-Side Transfer
Uses the second protruding rod end to push a part across a conveyor belt while the primary end retracts, keeping the motion symmetric without extra hardware.
Sensor-Flagged Index
Mounts a physical flag on the spare rod end to trigger an external electronic switch, verifying the full 160 mm travel position independently of the internal magnet.
Symmetric Vertical Lift
Lifts a 1.7 kg jig fixture vertically using the equal pull force, ensuring smooth travel without the force dropping at the end of the stroke.
Is the Airtac PBD Pen-shaped Double Rod Cylinder PBD10X160S the Right Cylinder?
Selecting this 10 mm bore yields 33 N of equal bidirectional force at 0.5 MPa (46.2 N at the 0.7 MPa maximum). If your application needs less force, the 6 mm bore provides 10.6 N; if you need more, stepping up to the 12 mm bore gives 46.7 N.
Because the stroke is 160 mm, both ends require clearance across the full travel, and the thin Ø4 mm rod needs an external guide or linear bearing to handle any off-axis loads over this long distance. Confirm your ordering essentials: 10 mm bore, 160 mm non-standard stroke, S magnet, and mounting choice.
Quick checklist
- ✓ Need equal force in both directions
- ✓ Second rod end for a sensor / stop / flag
- ✓ Better anti-rotation than a single rod
- ✓ Magnet (S) for sensors?
- ✓ Clearance for the rod on both ends
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Leave clearance for the rod at both ends.
- check Keep the load coaxial; avoid side load on the thin rods.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
Airtac PBD Pen-shaped Double Rod Cylinder PBD10X160S FAQ
It delivers an equal push and pull force of 33 N at 0.5 MPa and 46.2 N at 0.7 MPa. The maximum operating pressure is 0.7 MPa. The air port size is M5x0.8.
The twin rods resist rotation and provide a spare end for a stop or second load. A fixed TPU bumper decelerates the last few mm of travel but is not a lock; at high speeds with real mass, meter-out the exhaust or add an external shock absorber.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PBD Pen-Size Cylinders
Request a Quote for Airtac PBD Pen-shaped Double Rod Cylinder PBD10X160S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.