Airtac PBD Pen-shaped Double Rod Cylinder PBD10X20
The AirTAC PBD Pen-shaped Double Rod Cylinder PBD10X20 is a double-acting pen-size mini cylinder with a piston rod protruding from both covers. The twin rods share one piston, giving equal push and pull force, resisting rotation and providing a spare mounting or sensing end on a Ø10mm bore, 20mm stroke.
- BoreØ10 mm
- Stroke20 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM8×1.0
- ForceEqual both ways
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PBD Pen-shaped Double Rod Cylinder PBD10X20
The AirTAC PBD10X20 is a double-acting, double-rod pen-size mini cylinder. A shared piston drives a 4 mm rod out of both covers, meaning push and pull forces are identical at 33 N for 0.5 MPa. This symmetric thrust is ideal for pull-dominant duties where a single-rod unit would be weaker on retraction.
The twin rods resist twist better than a single rod, improving guidance, while the second end can carry a sensor flag or external stop. Built with SUS304 stainless steel and a fixed TPU bumper at each end, it uses an M5x0.8 air port and M8x1.0 rod-end thread.
Airtac PBD Pen-shaped Double Rod Cylinder PBD10X20 Technical Specifications
| Model | Airtac PBD Pen-shaped Double Rod Cylinder PBD10X20 |
|---|---|
| Series | PBD JIS pen-size double-rod cylinder |
| Bore size | Ø10 mm |
| Rod diameter | Ø4 mm (both ends) |
| Stroke | 20 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Both chambers act on the rod-side annular area, so push and pull forces are equal. Piston rod and barrel are stainless steel. Confirm against the product label before installation.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 33.0 N | 33.0 N |
| 0.7 MPa (max) | 46.2 N | 46.2 N |
Because a rod occupies both chambers, the effective area is identical on each side — push and pull forces match. Values are from the AirTAC thrust table (rod-side / pull column). Size with a friction margin.
Model Code: Airtac PBD Pen-shaped Double Rod Cylinder PBD10X20
| PBD | JIS pen-size double-rod mini-cylinder series. |
|---|---|
| 10 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
Fixed body — no separate back-cover code. Mounting accessories: LB, FA. Related PB-family variants: PB (single rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PBD Pen-shaped Double Rod Cylinder PBD10X20 Is Used
Dual-Side Transfer
Push a part from either direction with identical 33 N thrust, using both rod ends to shuttle components between two fixtures without adding a second cylinder.
Sensor-Flagged Index
Mount a flag on the spare rod end to trigger a reed or electronic switch, confirming position while the primary end performs the mechanical work.
Symmetric Clamp
Clamp a workpiece from both sides simultaneously. The twin rods resist rotational twist, keeping the tooling aligned during repetitive cycles.
Is the Airtac PBD Pen-shaped Double Rod Cylinder PBD10X20 the Right Cylinder?
This 10 mm bore generates 33 N of force both ways at 0.5 MPa. If you need less thrust, the 6 mm bore provides 10.6 N; for heavier loads, the 12 mm bore offers 46.7 N.
Both ends require rod clearance across the 20 mm stroke. Confirm your ordering essentials: bore, stroke, no magnet, and mount. The fixed TPU bumper only decelerates the final few millimeters, so meter-out the exhaust if moving real tooling mass at mid speed.
Quick checklist
- ✓ Need equal force in both directions
- ✓ Second rod end for a sensor / stop / flag
- ✓ Better anti-rotation than a single rod
- ✓ Magnet (S) for sensors?
- ✓ Clearance for the rod on both ends
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Leave clearance for the rod at both ends.
- check Keep the load coaxial; avoid side load on the thin rods.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
Airtac PBD Pen-shaped Double Rod Cylinder PBD10X20 FAQ
The push and pull forces are equal because both chambers act on the rod-side annular area. It generates 33 N of force at 0.5 MPa and 46.2 N at the maximum operating pressure of 0.7 MPa.
No, a plain double-acting cylinder drifts when air is lost. The fixed TPU bumper only decelerates the piston near the stroke end; it is not a lock. You need an external stop or rod lock for fail-safe holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PBD Pen-Size Cylinders
Request a Quote for Airtac PBD Pen-shaped Double Rod Cylinder PBD10X20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.