Airtac PBD Pen-shaped Double Rod Cylinder PBD10X30S
The AirTAC PBD Pen-shaped Double Rod Cylinder PBD10X30S is a double-acting pen-size mini cylinder with a piston rod protruding from both covers. The twin rods share one piston, giving equal push and pull force, resisting rotation and providing a spare mounting or sensing end on a Ø10mm bore, 30mm stroke.
- BoreØ10 mm
- Stroke30 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM8×1.0
- ForceEqual both ways
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PBD Pen-shaped Double Rod Cylinder PBD10X30S
The AirTAC PBD10X30S is a double-acting, double-rod pen-size mini cylinder with a 10mm bore and 30mm stroke. A rod extends from both covers on a single piston, meaning both chambers act on the same rod-side annular area. This gives exactly 33N of push and pull force at 0.5 MPa. The built-in S magnet works with reed or electronic switches for position sensing.
The twin SUS304 stainless rods resist twist better than a single shaft, while the spare end can carry a sensor flag or second tool. Ports are M5x0.8 and rod-end threads are M8x1.0. A fixed TPU bumper at each end decelerates the last few millimeters of travel.
Airtac PBD Pen-shaped Double Rod Cylinder PBD10X30S Technical Specifications
| Model | Airtac PBD Pen-shaped Double Rod Cylinder PBD10X30S |
|---|---|
| Series | PBD JIS pen-size double-rod cylinder |
| Bore size | Ø10 mm |
| Rod diameter | Ø4 mm (both ends) |
| Stroke | 30 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Both chambers act on the rod-side annular area, so push and pull forces are equal. Piston rod and barrel are stainless steel. Confirm against the product label before installation.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 33.0 N | 33.0 N |
| 0.7 MPa (max) | 46.2 N | 46.2 N |
Because a rod occupies both chambers, the effective area is identical on each side — push and pull forces match. Values are from the AirTAC thrust table (rod-side / pull column). Size with a friction margin.
Model Code: Airtac PBD Pen-shaped Double Rod Cylinder PBD10X30S
| PBD | JIS pen-size double-rod mini-cylinder series. |
|---|---|
| 10 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
Fixed body — no separate back-cover code. Mounting accessories: LB, FA. Related PB-family variants: PB (single rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PBD Pen-shaped Double Rod Cylinder PBD10X30S Is Used
Dual-Side Transfer
Push a part from one belt to another using one rod, while the opposite end mounts a counterweight or second gripper to balance the 30mm stroke motion.
Sensor-Flagged Index
Use the spare rod end to trip an external limit switch, leaving the primary 4mm rod and M8x1.0 thread free to move a lightweight machining fixture.
Symmetric Clamp
Clamp a workpiece from both sides simultaneously. The equal 33N push and pull force at 0.5 MPa ensures balanced holding pressure without pressure spikes.
Is the Airtac PBD Pen-shaped Double Rod Cylinder PBD10X30S the Right Cylinder?
Selecting this 10mm bore provides 33N of symmetric thrust at 0.5 MPa. If your duty cycle is lighter, the 6mm bore version offers 10.6N. For heavier pushing and pulling, stepping up to the 12mm bore yields 46.7N. Because rods protrude from both covers, you must layout clearance at both ends across the full 30mm stroke.
Confirm your ordering essentials: 10mm bore, 30mm stroke, S magnet for switch sensing, and your preferred mounting option. The slim 10mm body saves space in tight jigs. Note that the thin 4mm rod is built for coaxial thrust, so add an external linear guide if the application involves off-axis loads.
Quick checklist
- ✓ Need equal force in both directions
- ✓ Second rod end for a sensor / stop / flag
- ✓ Better anti-rotation than a single rod
- ✓ Magnet (S) for sensors?
- ✓ Clearance for the rod on both ends
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Leave clearance for the rod at both ends.
- check Keep the load coaxial; avoid side load on the thin rods.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
Airtac PBD Pen-shaped Double Rod Cylinder PBD10X30S FAQ
The push and pull forces are equal because both chambers act on the same rod-side area. It generates 33N of force at 0.5 MPa and 46.2N at the maximum operating pressure of 0.7 MPa.
Yes. Aside from the built-in S magnet for reed or electronic switches, the second protruding rod is ideal for carrying an external sensor flag or mechanical stop without extra hardware.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PBD Pen-Size Cylinders
Request a Quote for Airtac PBD Pen-shaped Double Rod Cylinder PBD10X30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.