The AirTAC AirTAC SAI200X600-S ISO 15552 Cylinder | 200mm Bore is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 600mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SAI200X600-S is a double-acting ISO 15552 profile cylinder engineered for heavy-duty industrial handling. It delivers a substantial 15708 N of push force at 0.5 MPa, making it well-suited for moving massive loads over its 600 mm stroke. The extruded aluminum barrel design omits tie rods for a clean exterior while maintaining strict dimensional interchangeability with other ISO 15552 actuators.
This specific configuration incorporates a SUS304 stainless steel rod for superior corrosion resistance and includes an integrated magnet for position sensing. You can mount CMSE or DMSE switches directly into the sensor grooves on both sides of the barrel. Fluid compatibility is limited to filtered 40 um air, operating safely between -20 and +70 C.
| Model | AirTAC SAI200X600-S ISO 15552 Cylinder | 200mm Bore |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Provides the robust linear force necessary to eject heavy finished parts or scrap from large stamping presses safely.
Handles and positions heavy chassis or powertrain components along the line with precise 600 mm travel.
Actuates large-scale lifting and positioning mechanisms for oversized industrial pallets and heavy fixtures.
Selecting this 200 mm bore actuator is appropriate when application thrust requirements exceed the 10053 N generated by the 160 mm variant at 0.5 MPa. If the full 15708 N is unnecessary, stepping down to the 160 mm bore saves physical envelope and air consumption. The PT tapered port threads ensure a robust, leak-free pneumatic connection at the G3/4 fitting.
Because the 600 mm stroke creates a long unsupported rod extension, careful attention must be paid to side-load management. Heavy lateral forces will bend the rod and accelerate bearing wear; utilizing an external guide rail or a twin-rod guided cylinder is strongly recommended. Note that the standard adjustable air cushions only decelerate the piston at stroke ends and will not hold a load vertically if air pressure is lost. For fail-safe holding, specify the SAIL or BSAI locking variants.
Quick checklist
At an operating pressure of 0.5 MPa, this 200 mm bore cylinder generates 15708 N of push force and 15080 N of pull force. It reaches a maximum theoretical force of 3204 kgf at 1.0 MPa.
Yes, the SAI200X600-S is built to the ISO 15552 standard, making its mounting dimensions fully interchangeable with comparable ISO 15552 profile cylinders from other manufacturers. It uses a G3/4 port and an M36x2 rod thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.