Airtac SAI63 Standard Cylinder SAI63X140
The AirTAC SAI63 Standard Cylinder SAI63X140 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 140mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke140 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI63 Standard Cylinder SAI63X140
The AirTAC SAI63X140 is a double-acting ISO 15552 profile cylinder featuring a 63mm bore and 140mm stroke. It generates 1559N of push thrust and 1402N of pull thrust at 0.5 MPa, making it well-suited for medium-duty industrial handling. The extruded aluminum barrel design integrates sensor grooves on both sides for straightforward position feedback.
This configuration utilizes a standard carbon steel piston rod and PT (tapered) G3/8 ports. If your assembly requires high-temperature resistance beyond the standard -20 to +70 C range, TPU seals can be swapped out for Viton (H) alternatives to maintain reliability in harsh environments.
Airtac SAI63 Standard Cylinder SAI63X140 Technical Specifications
| Model | Airtac SAI63 Standard Cylinder SAI63X140 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI63 Standard Cylinder SAI63X140
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI63 Standard Cylinder SAI63X140 Is Used
Mid-Tonnage Clamping
Delivers 1559N of push force at 0.5 MPa to securely hold medium-weight machined components during cutting or drilling operations.
Package Diversion
Utilizes the 140mm stroke to extend diverter arms smoothly across secondary packaging lines, with adjustable cushions absorbing end-of-stroke impact.
Vertical Lift Gates
Raises and lowers lightweight access gates on automated machinery, relying on double-acting air power for consistent bidirectional control.
Is the Airtac SAI63 Standard Cylinder SAI63X140 the Right Cylinder?
Select this 63mm bore when a 50mm bore falls short—yielding only 982N push force at 0.5 MPa—yet an 80mm bore (2513N push at 0.5 MPa) would be physically oversized or too heavy for your fixture. The 140mm stroke provides adequate travel for clamping and lifting without the side-load risks associated with long extensions. For applications needing secure load holding during air loss, integrate the SAIL variant or an external rod lock, as standard air cushions only decelerate the piston near stroke end.
This unit is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other ISO 15552 profile cylinders. It uses a G3/8 PT port, an M16x1.5 rod thread, and 36mm adjustable cushions at both ends. Mounting accessories include FA/FB flanges or TC trunnions, and a magnet (-S) is required if using CMSE or DMSE sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI63 Standard Cylinder SAI63X140 FAQ
At 0.5 MPa, the SAI63X140 provides 1559N of push force and 1402N of pull force. If operated at 0.7 MPa, the push force increases to 2182N.
Yes, the SAI63X140 is an ISO 15552 profile cylinder, making its mounting interface dimensionally interchangeable with other standard ISO 15552 cylinders of the same bore size.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI63 Standard Cylinder SAI63X140
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.