Airtac SAI63 Standard Cylinder SAI63X145
The AirTAC SAI63 Standard Cylinder SAI63X145 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 145mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke145 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI63 Standard Cylinder SAI63X145
The AirTAC SAI63X145 is a double-acting ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa and 1402 N of pull force. Its 145 mm stroke provides the precise mid-range travel needed for clamping, lifting, and indexing tasks. The extruded aluminum barrel eliminates tie-rods, resulting in a cleaner profile that drops directly into standardized ISO 15552 mounting footprints.
This configuration features a standard carbon steel piston rod and PT tapered port threads. Because no magnet is specified, it operates without sensor tracks; add the -S suffix if you need CMSE or DMSE switches for position detection. For operations requiring position holding without continuous air pressure, consider the SAIL variant.
Airtac SAI63 Standard Cylinder SAI63X145 Technical Specifications
| Model | Airtac SAI63 Standard Cylinder SAI63X145 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 145 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI63 Standard Cylinder SAI63X145
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×145 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI63 Standard Cylinder SAI63X145 Is Used
Component Clamping
Provides 1559 N of secure clamping force at 0.5 MPa for holding heavy machined parts during milling or drilling operations.
Package Diverting
Utilizes the 145 mm stroke to push cartons smoothly between adjacent conveyor lanes in high-speed sorting facilities.
Material Ejection
Delivers rapid ejection of molded parts from press beds, using adjustable cushions to absorb kinetic energy at stroke end.
Is the Airtac SAI63 Standard Cylinder SAI63X145 the Right Cylinder?
Select this 63 mm bore when a 50 mm cylinder (providing 982 N at 0.5 MPa) lacks the power to move your load, but an 80 mm bore (2513 N) would be excessive and consume too much air volume. The 145 mm stroke hits a sweet spot for compact machinery. To match an existing installation, verify the G3/8 port, M16x1.5 rod thread, and ISO 15552 mounting accessories like FA flanges or TC trunnions.
Since this is a standard double-acting actuator, it will drift if air pressure is lost or the control valve is centered. The adjustable air cushions at both ends only decelerate the piston near the stroke ends to prevent impact damage; they do not lock the load. Use an external pilot-operated check valve if you need static holding power.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI63 Standard Cylinder SAI63X145 FAQ
At 0.5 MPa operating pressure, this cylinder generates 1559 N of push force and 1402 N of pull force. If you increase pressure to 0.7 MPa, the push force rises to 2182 N.
Yes. The SAI63X145 is dimensionally interchangeable per ISO 15552. You can drop it into existing mounts using standard FA, LB, or TC accessories, provided your setup matches the G3/8 port and M16x1.5 rod thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI63 Standard Cylinder SAI63X145
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.