
The AirTAC SAID200 Double Rod Cylinder SAID200AX35S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 35mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID200X35-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 200 mm bore and 35 mm stroke. Because the piston rod extends from both end covers, the annulus area is identical on the extend and retract sides. This yields equal force and speed in both directions, generating 15079 N at 0.5 MPa and 21110 N at 0.7 MPa each way.
This specific configuration includes a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance. The -S magnet enables position sensing with AirTAC CMSE reed or DMSE solid-state switches. The rear rod protrusion allows you to mount a secondary cam or position flag, while the twin-rod design provides superior anti-rotation guidance for heavy loads.
| Model | Airtac SAID200 Double Rod Cylinder SAID200AX35S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives heavy-duty press operations requiring identical push and pull forces, utilizing the 15079 N both-way capacity at 0.5 MPa to avoid imbalanced loading.
Simultaneously operates two separate mechanisms or tooling stations by mounting workpieces to both the front and rear rod ends.
Guides heavy linear slides and transfer carriages where a single rod would twist under high torque, using the twin rods for rotational stability.
Select this 200 mm bore actuator when an application demands massive bidirectional force that is perfectly symmetric, stepping up from the 160 mm bore which provides 9425 N at 0.5 MPa. A double-rod cylinder is chosen over a single-rod SAI when the mechanism requires twin-side load guidance, anti-rotation stability, or rear-rod position sensing. The PT tapered port threads ensure a rigid, metal-to-metal pneumatic seal.
Ensure your layout accommodates the extra rear-rod clearance, as the rod exits both ends. Note that the adjustable air cushions at both ends decelerate the piston near stroke limits but do not lock or hold the load; if position holding without live air pressure is required, consider a BSAID clamp-lock cylinder or an external pilot-operated check valve. This unit is dimensionally interchangeable per ISO 15552.
Quick checklist
Because it is a double-rod cylinder, the effective area is the same on both sides of the piston. It delivers an equal force of 15079 N in both directions at 0.5 MPa, and 21110 N at 0.7 MPa.
Yes, the SAID200X35-S is a true ISO 15552 profile cylinder, making its mounting interface dimensionally interchangeable with other ISO 15552 double-rod cylinders. It uses the standard SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.