
The AirTAC SAID200 Double Rod Cylinder SAID200AX475 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 475mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID200X475 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 200mm bore and 475mm stroke. Because a piston rod exits both end covers, the effective annulus area is identical on extend and retract, yielding an equal 15079 N of force in each direction at 0.5 MPa. This through-rod architecture is dimensionally interchangeable per ISO 15552 standards, serving as a direct replacement for other ISO 15552 double-rod cylinders.
This specific unit is configured with a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance. It features PT tapered port threads and lacks a magnetic piston, meaning it is not compatible with CMSE or DMSE position sensors. The extruded aluminum barrel includes sensor grooves on both sides for standard configurations, while the rear rod protrusion requires additional clearance space to mount a secondary cam or position flag.
| Model | Airtac SAID200 Double Rod Cylinder SAID200AX475 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Utilizes the equal 15079 N extend and retract force to execute identical pressing and forming operations on both the forward and return strokes without adjusting pressure regulators.
Drives two separate workstations simultaneously by mounting a primary tool on the front rod end and a secondary mechanism or position flag on the rear protruding rod.
Leverages the dual-rod guidance to maintain strict linear orientation for heavy 200mm bore loads, preventing torsional twist during high-speed transfer movements.
Choose this 200mm bore size when an application demands heavy symmetric force, stepping up from the 160mm bore which provides 9425 N both ways at 0.5 MPa. The twin-rod design is selected over a single-rod SAI cylinder when the mechanism requires dual-side guidance to prevent rotation, or when a rear rod end is needed to drive a secondary mechanism. Mounting options are restricted to the SAID subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR accessories used on single-rod variants.
At a 475mm stroke, the unsupported rod length is substantial; the 40mm diameter rod and M36x2 thread can handle high side loads, but an external guide rail is recommended to prevent rod-bearing bending. Note that a plain SAID does not hold its load when air pressure is lost or exhausted—the adjustable air cushions only decelerate the piston near stroke end. For true position holding without live pressure, consider an external rod lock, a SAIL cylinder, or a BSAID clamp-lock variant.
Quick checklist
The SAID200X475 provides equal force in both directions due to the double-rod design. It delivers 15079 N at 0.5 MPa, 21110 N at 0.7 MPa, and 27141 N at 0.9 MPa on both extend and retract strokes.
No, the SAID uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR accessories because the rear rod protrudes through the back cover. It is dimensionally interchangeable per ISO 15552.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.