
The AirTAC SAID200 Double Rod Cylinder SAID200AX600 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 600mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID200X600 is a double-acting, double-rod ISO 15552 profile cylinder engineered for heavy-duty symmetrical actuation. Because the piston rod extends from both end covers, the effective annulus area is identical on extend and retract. This yields exactly 15079 N of force in both directions at 0.5 MPa, ensuring perfectly balanced motion for demanding transfer tasks.
This 200 mm bore unit features a robust 40 mm SUS420J2 stainless steel rod and PT tapered ports. The rear rod protrusion allows engineers to mount a secondary cam, position flag, or drive a second mechanism. It utilizes adjustable air cushions at both ends to decelerate the massive moving load smoothly.
| Model | Airtac SAID200 Double Rod Cylinder SAID200AX600 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives heavy automated platens where equal 15079 N push and pull forces at 0.5 MPa are required to move identical payloads in both directions without speed variation.
The twin-rod geometry prevents piston rotation during extension, providing precise linear guidance for heavy machining or press fixtures without external guides.
Utilizes the rear protruding rod end to mount a physical cam or position flag, driving external limit switches while the front rod handles the primary 600 mm work stroke.
Selecting this 200 mm bore over the neighboring 160 mm bore steps the bidirectional force up from 9425 N to 15079 N at 0.5 MPa. A twin-rod design is chosen over a single-rod SAI when the application demands superior anti-rotation guidance, dual-side work mounting, or rear-rod position sensing. For direct replacement, match the 200 mm bore, 600 mm stroke, PT port thread, and appropriate mounting accessory. Note that SAID supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, omitting the FB, CA, CB, and CR options found on single-rod variants.
At 600 mm of stroke, the unsupported mass of the 40 mm rod creates a significant bending moment and risk of side-load damage to the rod bearing. An external linear guide is strongly recommended to support the load. Remember that the adjustable air cushion only decelerates the piston near stroke end; it does not lock or hold the load. If position holding without live air pressure is required, specify a BSAID clamp-lock cylinder or an external rod lock.
Quick checklist
Because it is a double-rod cylinder, the effective piston area is identical on both sides. It provides 15079 N of force in both the extend and retract directions at 0.5 MPa, and 21110 N at 0.7 MPa.
Yes, the SAID200X600 is dimensionally interchangeable per ISO 15552. You can drop it in for other ISO 15552 double-rod cylinders by matching the 200 mm bore, 600 mm stroke, PT port, and mounting interface, ensuring you have adequate rear-rod clearance.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.