
The AirTAC SAID200 Double Rod Cylinder SAID200AX90S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 90mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID200X90-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 200 mm bore and 90 mm stroke. Because the twin SUS420J2 stainless steel rods occupy both piston sides, the annulus area is identical in each direction, yielding an equal 15079 N of force both extending and retracting at 0.5 MPa. A piston magnet is included for position sensing.
This through-rod configuration allows a workpiece to mount on one end while a cam, secondary tool, or position flag attaches to the rear rod end. The extruded aluminum barrel includes sensor grooves on both sides for AirTAC CMSE reed and DMSE solid-state switches. Fluid supply is filtered air via PT tapered G3/4 ports.
| Model | Airtac SAID200 Double Rod Cylinder SAID200AX90S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Provides 15079 N of equal force extending and retracting to drive heavy stamping or forming presses without asymmetric speed drift.
Actuates two linked workstations simultaneously using both rod ends, ensuring perfectly synchronized movement for heavy material handling.
Uses the dual rods exiting both end covers to keep heavy structural loads guided and prevent rotation without external guide rails.
Select this 200 mm bore when an application requires massive bidirectional force, as it generates 15079 N each way at 0.5 MPa. If a smaller footprint suffices, stepping down to a 160 mm bore provides 9425 N both ways. The double-rod design is chosen over a single-rod SAI when the load requires anti-rotation guidance, symmetric transfer, or rear-rod actuation. Note that the adjustable air cushions only decelerate the piston near stroke end; they do not hold the load. If position holding without live pressure is needed, use a BSAID clamp-lock or an external rod lock.
This model is dimensionally interchangeable per ISO 15552 for direct replacement of other double-rod profile cylinders. Specify the 90 mm stroke, G3/4 PT ports, SUS420J2 (A) rod material, and the -S magnet. Mounting accessories use the SAID subset: Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Quick checklist
Because the rod area is subtracted on both sides, the SAID200X90-S generates equal force in both directions. It provides 15079 N at 0.5 MPa, 21110 N at 0.7 MPa, and 27141 N at 0.9 MPa.
Yes, the SAID200X90-S is an extruded aluminum profile cylinder with standard ISO 15552 mounting dimensions, making it a direct replacement for other ISO 15552 double-rod cylinders. It uses PT G3/4 ports and includes a magnet for CMSE/DMSE sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.